Removing the Main Board

1.

See

'Removing the

Battery Pack" on page 54.

2.

See

'Removing the

SD dummy card" on page 55.

3.

See

'Removing the

ExpressCard dummy card

' on page 56

4.

See

'Removing the

Lower Cover" on page 56.

5.

See

'Removing the

DIMM" on page 58.

6.

See

'Removing the

TV Tuner Board Modules"

on page 58.

7.

See

'Removing the

TV Tuner Board Modules"

on page 58.

CO

See

'Removing the

Hard Disk Drive Module 1'

on page 64.

9.

See

'Removing the

Hard Disk Drive Module 2"

on page 66.

10.

See

'Removing the

Hard Disk Drive Module 2"

on page 66.

  1. See "Removing the Middle Cover" on page 73.
  2. See "Removing the Keyboard" on page 74.
  3. See "Removing the Heatsink Module" on page 78.
  4. See "Removing the CPU" on page 80.
  5. See "Removing the LCD Module" on page 84.
  6. See "Separating the Upper Case from the Lower Case" on page 87.
  7. See "Removing the Modem Board" on page 100.
  8. Disconnect the USB cable from the USBCN1 connector on the main board.

19. Disconnect the subwoofer cable from FRONT1 connector on the main board.

20. Remove the one screw (B) securing the main board in place.

Step

Size (Quantity)

Color

Torque

1

M2 x L4 (1)

Silver

1.6 kgf-cm

  1. Carefully remove the main board.
  2. Carefully remove the main board.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment