Removing the LCD Module

1.

See

"Removing the Battery Pack" on page 54.

2.

See

"Removing the SD dummy card" on page 55.

3.

See

"Removing the ExpressCard dummy card" on page 56.

4.

See

"Removing the Lower Cover" on page 56.

5.

See

"Removing the TV Tuner Board Modules" on page 58.

6.

See

"Removing the TV Tuner Board Modules" on page 58.

7.

See

"Removing the Middle Cover" on page 73.

8.

See

"Removing the Keyboard" on page 74.

9.

Turn over the system and remove the two screws (A) from the bottom of the left and right hinges.

Laptop Torque Hinges

Step

Size (Quantity)

Color

Torque

1~2

M2.5 x L8 (2)

Black

3.0 kgf-cm

  1. Turn over the system and remove the mylar covering the LCD cable connector.
  2. Turn over the system and remove the mylar covering the LCD cable connector.

12. Carefully pull out the wireless antenna cables from the hole and release the cables from the latches.

13. Disconnect the microphone cable from MIC1 on the system and release it from the latches.

14. Remove the two screws (A) from the left and right hinge of the LCD module.

Step

Size (Quantity)

Color

Torque

1~2

M2.5 x L8 (2)

Black

3.0 kgf-cm

  1. Carefully remove the LCD module from the base unit.
  2. Carefully remove the LCD module from the base unit.
Acer Aspire 6930g Upper Base

NOTE: When connecting the cable back to the unit, please note that the cable should be routed well.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment