Removing the LCD Bezel

  1. See "Removing the Battery Pack" on page 54.
  2. See "Removing the SD dummy card" on page 55.
  3. See "Removing the ExpressCard dummy card" on page 56.
  4. See "Removing the Lower Cover" on page 56.
  5. See "Removing the TV Tuner Board Modules" on page 58.
  6. See "Removing the TV Tuner Board Modules" on page 58.
  7. See "Removing the Middle Cover" on page 73.
  8. See "Removing the Keyboard" on page 74.
  9. See "Removing the LCD Module" on page 84.
  10. Remove the four screw covers from the top and two flat screw covers from the bottom of the LCD bezel.
Lcd Disassemble

11. Remove the six screws (C) on the LCD module as shown.

Step

Size (Quantity)

Color

Torque

1~6

M2.5 x L6 (6)

Black

3.0 kgf-cm

12. Carefully pry open the LCD bezel and place the bezel on top of the LCD panel.

Acer Aspire 8730z

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment