Removing the Optical Drive Module

  1. See "Removing the Battery Pack" on page 46.
  2. Remove the screw securing the ODD module.

Step

Size

Quantity

Screw Type

ODD Module

M2.5*8

1

  1. Insert a suitable tool into the access slot in the battery bay as shown. Gently lever the ODD module out of the chassis.
  2. Pull the optical drive module out from the chassis.

5. Remove the two screws securing the ODD bracket and remove the ODD bracket from the optical disk drive module.

Step

Size

Quantity

Screw Type

ODD Bracket

M2*3

2

*

  1. Remove the ODD bezel by rotating the top edge downward and pulling it clear of the module.
  2. Remove the ODD bezel by rotating the top edge downward and pulling it clear of the module.
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment