Removing the Upper Base

  1. Remove the LCD module. See "Removing the LCD Module" on page 67.
  2. Turn the computer over. Remove the ten screws on the bottom panel.

Step

Size

Quantity

Screw Type

Upper Cover (Red call out)

M2.0*3.0-I-NI-NYLOK

2

»

Upper Cover (Blue call out)

M2.5*6.5-I (BZN(NYLOK-RED)

11

3. Turn the computer over and disconnect the three FFC cables from the mainboard.

Unlock the connector and disconnect C as shown.

Unlock the connector and disconnect C as shown.

4. Remove the ten securing screws on the top panel.

Step

Size

Quantity

Screw Type

Upper Cover

M2.5*6.5-I (BZN(NYLOK-RED)

10

WARNING:Care must be taken when removing the Upper Base from the Lower Base to prevent damage or stress to the surface.

5. Grasp the upper base by the sides and gently lift to remove.

  1. Remove the Upper Base. See "Removing the Upper Base" on page 68.
  2. Unlock the securing latch and disconnect the Touch Pad FFC.
3. Unlock the securing latch and disconnect the Finger Print Reader FFC.
4. Remove the three securing screws.

Step

Size

Quantity

Screw Type

Finger Print Reader

M2.0*3.0-I-NI-NYLOK

3

»

5. Using your fingers, gently lift the Finger Print Reader board from the Upper Base.

The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Post a comment