Changing a Password

Use the t and i keys to highlight the Set Supervisor Password parameter and press the Enter key. The Set Password box appears. 2. Type the current password in the Enter Current Password field and press Enter. 3. Type a password in the Enter New Password field. Retype the password in the Confirm New Password field. 4. Press Enter. After setting the password, the computer sets the User Password parameter to Set. 5. If desired, you can enable the Password on boot parameter. 6. When you are done,...

Removing a Password Follow these steps

Use the t and i keys to highlight the Set Supervisor Password parameter and press the Enter key. The Set Password box appears 2. Type the current password in the Enter Current Password field and press Enter. 3. Press Enter twice without typing anything in the Enter New Password and Confirm New Password fields. The computer then sets the Supervisor Password parameter to Clear. 4. When you have changed the settings, press u to save the changes and exit the BIOS Setup Utility.

IO interface

Acer EasyPort IV connector* ExpressCard 54 slot Acer Bio-Protection fingerprint reader* 5-in-1 card reader (SD MMC MS MS PRO xD) 3 USB 2.0 ports USB 2.0 eSATA port * NOTE If you plug an eSATA device you will have three USB ports available in the mean time. HDMI port with HDCP support* External display (VGA) port Consumer infrared (CIR) port RF-in jack* Headphones speaker line-out jack with S PDIF support* Microphone-in jack Line-in jack Ethernet (RJ-45) port Modem (RJ-11) port DC-in jack for AC...

Right View

USB mouse, USB camera). Internal optical drive accepts CDs or DVDs. Lights up when the optical drive is active. Ejects the optical disk from the drive. Ejects the optical drive tray when the computer is turned off. Note Insert a paper clip into the emergency eject hole to eject the optical drive tray when the computer is off. Accepts input signals from digital TVtuner devices (only for certain models). Connects to a Kensington-compatible computer security lock.

Using the System Utilities

Acer Bio-Protection (only for certain models) Acer Bio-Protection Fingerprint Solution is a multi-purpose fingerprint software package integrated with the Microsoft Windows operating system. Utilizing the uniqueness of one's fingerprint features, Acer Bio-Protection Fingerprint Solution has incorporated protection against unauthorized access to your computer with centralized password management with Password Bank, easy music player launching with Acer MusicLaunch, secure Internet favorites via...

Removing the Upper Base

See Removing the LCD Module on page 67. 2. Turn the computer over. Remove the ten screws on the bottom panel. 3. Turn the computer over and disconnect the three FFC cables from the mainboard. Unlock the connector and disconnect C as shown. Unlock the connector and disconnect C as shown. 4. Remove the ten securing screws on the top panel. WARNING Care must be taken when removing the Upper Base from the Lower Base to prevent damage or stress to the surface. 5. Grasp the...

Replacing the Upper Cover

WARNING Care must be taken when replacing the Upper Case to prevent damage or stress to the surface. 1. Starting with the rear, align the upper cover with the lower cover, taking care to not force in place. 2. Replace the ten securing screws on the top panel. 3. Reconnect the three FFC cables to the mainboard. Reconnect C as shown, and close the locking latch. Reconnect C as shown, and close the locking latch. 4. Turn the computer over. Replace the ten screws on the bottom panel.

Disassembly Requirements

To disassemble the computer, you need the following tools Wrist grounding strap and conductive mat for preventing electrostatic discharge NOTE The screws for the different components vary in size. During the disassembly process, group the screws with the corresponding components to avoid mismatch when putting back the components.

Replacing the Thermal Module

Aspire 5050 Bluetooth

WARNING To prevent damage to the Thermal Module or the CPU, hold the Thermal Module by both ends at the same time. 1. Align and place the Thermal Module in the on the 2. Replace the two securing screws red and tighten mainboard as shown. the three captive screws blue found on the 1. Ensure that the Mainboard is face up. Place the 2. While holding the left side of the Lower Base, lower Mainboard in the chassis, left hand rear edge first. and pivot the mainboard in to the base. 3. Ensure the...

Replacing the LCD Module

Aspire 6530g Repair

Carefully align the LCD module over the hinge sockets and lower the module into the chassis, taking care not to trap the LCD cables. 2. Replace the four securing screws two on each side securing the LCD module. 2. Replace the four securing screws two on each side securing the LCD module. 3. Replace the LCD power cable and AC power cable in the cable guides and clips as shown. NOTE There are two cable channels. The upper channel holds the AC power cable and the lower channel holds the LCD...

J vn

Acer Aspire 6930 Lcd Hinges

NOTE If you are having difficulty removing the cables, first lift the Inverter Board from the back cover before disconnecting the cables. 3. Remove the Inverter board from the LCD Module. 1. Remove the LCD Bezel. See Removing the LCD Bezel on page 81. 2. Disconnect the Camera Module cable as shown. NOTE If necessary lift the camera module to provide better access to the cables. 3. Place your finger on the ends of the module and pry it away from the cover. 1. Remove the LCD Bezel. See Removing...

Left View

Connects to an Ethernet 10 100 1000-based network. Connects to Acer EasyPort IV only for certain models . Connects to a display device e.g. external monitor, LCD projector . Supports high definition digital video connections only for certain models . Connects to USB 2.0 or eSATA devices only for certain models . Note If you plug an eSATA device you will have three USB ports available in the mean time. Connect to USB 2.0 devices e.g. USB mouse, USB camera . Headphones speaker line-out jack with...

Setting a Password

Follow these steps as you set the user or the supervisor password 1. Use the t and i keys to highlight the Set Supervisor Password parameter and press the Enter key. The Set Supervisor Password box appears 2. Type a password in the Enter New Password field. The password length can not exceeds 8 alphanumeric characters A-Z, a-z, 0-9, not case sensitive . Retype the password in the Confirm New Password field. IMPORTANT Be very careful when typing your password because the characters do not appear...

External Mouse Failure

If an external Mouse fails, perform the following actions one at a time to correct the problem. 2. If the mouse uses a wireless connection, insert new batteries and confirm there is a good connection. See the mouse user manual. 3. If the mouse uses a USB connection, try an alternate USB port. 4. Try an alternative program to verify mouse operation. Reinstall the program experiencing mouse failure. 6. Remove any recently added hardware and associated software. 7. Remove any recently added...

Intermittent Problems

Intermittent system hang problems can be caused by a variety of reasons that have nothing to do with a hardware defect, such as cosmic radiation, electrostatic discharge, or software errors. FRU replacement should be considered only when a recurring problem exists. When analyzing an intermittent problem, do the following 1. Run the advanced diagnostic test for the system board in loop mode at least 10 times. 2. If no error is detected, do not replace any FRU. 3. If any error is detected,...

Core POST Code Table

Debug Test driver for debug test PPI 1 If install debugTest driver Debug Test driver for debug test PPI 2 If install debugTest driver Debug Test driver for debug test PPI 3 If install debugTest driver Processing notify event for newly installed PPI Fail to hand off to next phase, system halt All PEIM dispatched Going to DxeIpl End of S3 resume, jump back to Waking vector Initialize the installed boot devices BIOSPSM Exception Handler Divide error Go to legacy BIOS or BDS Entry Point Debug Test...

Exit

The Exit screen allows you to save or discard any changes you made and quit the BIOS Utility. Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes S Select Item F5 F6 lt gt Select Menu Enter The table below describes the parameters in this screen. The table below describes the parameters in this screen. Exit System Setup and save your changes to CMOS. Exit utility without saving setup data to CMOS. Load default values for all SETUP item. Load previous...

HDD Not Operating Correctly

If the HDD does not operate correctly, perform the following actions one at a time to correct the problem. 1. Disconnect all external devices. 2. Run a complete virus scan using up-to-date software to ensure the computer is virus free. 3. Run the Windows Vista Startup Repair Utility a. insert the Windows Vista Operating System DVD in the ODD and restart the computer. b. When prompted, press any key to start to the operating system DVD. c. The Install Windows screen displays. Click Next. d....

Front View

Web camera for video communication only for certain models . Internal microphone for sound recording. Also called Liquid-Crystal Display LCD , displays computer output Configuration may vary by models . Light-Emitting Diodes LEDs that light up to show the status of the computer's functions and components. For entering data into your computer. Comfortable support area for your hands when you use the computer. Click buttons left, center and right The left and right buttons function like the left...

Replacing the Modem Module

Align the screw sockets and press the modem 2. Replace the two securing screws. module down to connect to the mainboard. 1. Replace the USB board on the lower base and secure with the single screw provided . 1. Replace the USB board on the lower base and secure with the single screw provided . 2. Reconnect the USB cable as shown. 2. Reconnect the USB cable as shown.

Internal Speaker Failure

Acer 6530g Sound Problem

If the internal Speakers fail, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs 2. Navigate to Starts Control Panels System and Maintenance System Device Manager. Check the Device Manager to determine that The device is properly installed. There are no red Xs or yellow exclamation marks. There are no device conflicts. No hardware is listed under Other Devices. 3. Roll back the audio driver to the previous version, if updated recently. 4....

Removing the USB Board

See Removing the Upper Base on page 68. 2. Grasp the cable connector and pull to remove from the bottom base. 3. Remove the single securing screw from the USB board. 3. Remove the single securing screw from the USB board. 4. Hold the USB board by the edges and pull up to remove.

Navigating the BIOS Utility

There are six menu options Information, Main, Advanced, Security, Boot, and Exit. Follow these instructions To choose a menu, use the left and right arrow keys. To choose an item, use the up and down arrow keys. To change the value of a parameter, press F5 or F6. A plus sign indicates the item has sub-items. Press Enter to expand this item. Press Esc while you are in any of the menu options to go to the Exit menu. In any menu, you can load default settings by pressing F9. You can also press F10...

Information

The Information screen displays a summary of your computer hardware information. F1 Help ti Select Item F5 F6 Change Values F9 Setup Defaults ESC Exit lt gt Select Menu Enter Select Sub-Menu F10 Save and Exit NOTE The system information is subject to different models. NOTE The system information is subject to different models. This field shows the CPU type and speed of the system. This field shows the speed of the CPU. This field shows the model name of device installed on primary IDE master....

Undetermined Problems

The diagnostic problems does not identify which adapter or device failed, which installed devices are incorrect, whether a short circuit is suspected, or whether the system is inoperative. Follow these procedures to isolate the failing FRU do not isolate non-defective FRU . NOTE Verify that all attached devices are supported by the computer. NOTE Verify that the power supply being used at the time of the failure is operating correctly. See Power On Issue on page 118. 2. Visually check them for...

Replacing the TV Tuner Module

Tuner For Acer 6530g

Insert the TV Tuner into the bracket as shown. 2. Insert the TV Tuner in to the socket. 2. Insert the TV Tuner in to the socket. 3. Replace the two securing screws. 4. Attach the cable as shown, ensuring that the TV Tuner antenna follows the installation pattern of the LCD antenna cables. 1. Insert the VGA module into the socket as shown. 2. Replace the four securing screws. 1. Insert the VGA module into the socket as shown. 2. Replace the four securing screws. NOTE To replace DIMM Module 2,...

Lock Keys and embedded numeric keypad

The keyboard has three lock keys which you can toggle on and off. H fre jjfjf rilifi llj'w tfjno When Caps Lock is on, all alphabetic characters typed are in uppercase. When Num Lock is on, the embedded keypad is in numeric mode. The keys function as a calculator complete with the arithmetic operators , -, , and . Use this mode when you need to do a lot of numeric data entry. A better solution would be to connect an external keypad. Scroll Lock lt Fn gt lt F12 gt When Scroll Lock is on, the...

Replacing the Keyboard

Align the FFC with the connector and press the 2. Turn the keyboard over and press down to secure. latch down to secure. 1. Place the power board in the switch cover as 2. Replace the three securing screws. shown. 3. Reconnect the cable and FFC as shown. 3. Reconnect the cable and FFC as shown. 5. Press down on the edges of the Switch Cover first. 5. Press down on the edges of the Switch Cover first. 6. Snap the Switch Cover in to place by pressing down in the centre of the cover. 7. Turn...

Removing the Bluetooth Module

Acer 6530 Bluetooth

See Removing the Modem Module on page 73. 2. Grasp the cable as shown and pull to disconnect from the Bluetooth module. 3. Remove the single securing screw. 1. Remove the LCD Module. See Removing the LCD Module on page 67. 2. Remove the Upper Base. See Removing the Upper Base on page 68. 3. Remove the See Removing the Modem Module on page 73. 4. Remove the Bluetooth Module. See Removing the Bluetooth Module on page 74. 5. Disconnect the USB and Bluetooth cables...

Removing the Power Board

Aspire 6530 Power Board

See Removing the Battery Pack on page 44. 2. Expose the bottom side of the Switch Cover. See Removing the Switch Cover on page 60. 3. Unlock the connector to remove the FFC cable. 4. Grasp the cable and disconnect from the Power Board. 5. Remove the three securing screws from the Power Board. 6. Hold the module by the sides and lift to remove. 6. Hold the module by the sides and lift to remove. 1. Remove the Switch Cover. See Removing the Switch Cover on page 60. 2. Lift and turn the...

Removing the Main Hard Disk Drive Module

Acer Aspire 6530g How Remove Main Hdd

See Removing the Battery Pack on page 44. 2. Remove the Lower Cover. See Removing the Lower Covers on page 47. 3. Hold the Pull Tab and slide the HDD away from the connector. Pull the HDD up as shown to remove. NOTE To prevent damage to HDD, avoid pressing down on it or placing heavy objects on top of it. 4. Remove the four screws securing the HDD to the carrier.

Removing the LCD Brackets and FPC Cable

See Removing the LCD Panel on page 86. 2. Dislodge the LCD cable from the left LCD hinge as shown in the following image. 3. Turn the LCD Panel over on a clean surface, and grip the LCD cable by both ends and pull it back. 4. Grip the adhesive strip and pull it back. 5. Continue to pull back the LCD cable. 6. Peel back the adhesive strip holding the cable to the bottom. 7. Remove the eight securing screws four on each side from the LCD Panel brackets. 8. Remove the LCD...

Removing the Antenna Cables

See Removing the Lower Covers on page 47. 1. Remove the Speaker Module. See Removing the Speaker Module on page 64. 2. Turn the computer upside down, and disconnect the Antenna Cables from the WLAN module. 3. Pull back the cables away and out of the housing well. 3. Pull back the cables away and out of the housing well. 4. Turn the computer over upper base facing up to expose the Antenna cables. 5. After removing the Speaker Modules, grasp the Antenna cables sitting...

Chipset POST Codes

Check for DRAM initialization interrupt and reset fail Determine the system Memory type based on first populated socket Verify all DIMMs are DDR2 and SO-DIMMS, which are unbuffered Verify all DIMMs are single or double sided and not mixed Verify all DIMMs are x8 or x16 width Calculate number of Row and Column bits Calculate number of banks for each DIMM Find a common CAS latency between the DIMMS and the MCH Determine the memory frequency and CAS latency to program Determine the smallest common...

Removing the LCD Bezel

See Removing the LCD Module on page 67. 2. Remove the four upper screw caps and screws, and the six remaining lower securing screws. 3. Lift up the bezel, topside first, and remove it from the LCD Module. 3. Lift up the bezel, topside first, and remove it from the LCD Module. 5. After removing the top part of the bezel, grasp the bottom corners and continue lifting up the bezel as shown. 5. After removing the top part of the bezel, grasp the bottom corners and continue...

Common Problems

Use the following procedure as a guide for computer problems. NOTE The diagnostic tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options can give false errors and invalid system responses. 1. Obtain the failing symptoms in as much detail as possible. 2. Verify the symptoms by attempting to re-create the failure by running the diagnostic test or by repeating the same operation. 3. Use the following table with the verified symptom to determine which...

Removing the TV Tuner Module

Aspire 6530g Cmos Battery

See Removing the Battery Pack on page 44. 2. Remove the Lower cover. See Removing the Lower Covers on page 47. 3. Disconnect the antenna cable from the TV Tuner board as shown. NOTE To ensure proper assembly, the antenna cable must be installed as shown. 4. Move the antenna cables away and remove the two screws to release the TV Tuner module and bracket assembly. 5. Detach the TV Tuner module by grasping the assembly and pulling away as shown. 5. Detach the TV Tuner module by grasping the...

Removing the Secondary Hard Disk Drive Module

Acer Aspire 6930g Secondary Hdd

See Removing the Battery Pack on page 44. 2. Remove the HDD2 Cover. See Removing the Lower Covers on page 47. 3. Remove the two securing screws from the HDD. 4. Grasp the Pull Tab and pull the HDD out of the bay as shown. 4. Grasp the Pull Tab and pull the HDD out of the bay as shown. 5. Remove the four screws securing the HDD to the carrier. Main Unit Disassembly Process Main Unit Disassembly Flowchart CAUTION Using tools to remove the Switch Cover may cause damage to...

Disassembly Process

The disassembly process is divided into the following stages External module disassembly The flowcharts provided in the succeeding disassembly sections illustrate the entire disassembly sequence. Observe the order of the sequence to avoid damage to any of the hardware components. For example, if you want to remove the main board, you must first remove the keyboard, then disassemble the inside assembly frame in that order.

Acer Grid Vista dualdisplay compatible

NOTE This feature is only available on certain models. To enable the dual monitor feature of the notebook, first ensure that the second monitor is connected, then select Start, Control Panel, Display and click on Settings. Select the secondary monitor 2 icon in the display box and then click the check box Extend my windows desktop onto this monitor. Finally, click Apply to confirm the new settings and click OK to complete the process. Acer GridVista is a handy utility that offers four...

Removing the CPU

See Removing the Thermal Module on page 78. 2. Using a flat screwdriver, turn the CPU socket latch counter-clockwise 180 to release the CPU. 3. Lift the CPU clear of the Mainboard. LCD Module Disassembly Process LCD Module Disassembly Flowchart

Replacing the Main Hard Disk Drive Module

Aspire 6530 Hard Drive

Place the HDD in the HDD carrier. 1. Replace the HDD connector. 2. Place the HDD in the HDD carrier. 3. Replace the four screws to secure the carrier. 4. Insert the back first and angle the HDD in place. Push down to connect the HDD interface. 1. Insert the WLAN board into the WLAN socket. 2. Replace the two screws to secure the module. 1. Insert the WLAN board into the WLAN socket. 2. Replace the two screws to secure the module. 3. Connect the two antenna...

Remove Hddbios Utility

Reset The Hdd User Password

This section provide you with removing HDD BIOS method If you key in wrong HDD password three times, Hdd password error code displays. See the image below. To reset the HDD password, run HDD_PW.EXE as follows 3. Select one upper-case string from the list. 4. Reboot system and key in the selected string 0KJFN42 or UVEIQ96 on the HDD User Password screen. Enter Prinary faster HDD User Password If you key in the wrong Supervisor Password three times, System Disabled displays on the screen. See the...

Windows Keys

The keyboard has two keys that perform Windows-specific functions. The keyboard has two keys that perform Windows-specific functions. Pressed alone, this key has the same effect as clicking on the Windows Start button it launches the Start menu. It can also be used with other keys to provide a variety of functions lt gt Open or close the Start menu lt gt lt D gt Display the desktop lt gt lt E gt Open Windows Explore lt gt lt F gt Search for a file or folder lt gt lt G gt Cycle through Sidebar...

Hot Keys

The computer employs hotkeys or key combinations to access most of the computer's controls like screen brightness, volume output and the BIOS utility. To activate hot keys, press and hold the lt Fn gt key before pressing the other key in the hotkey combination. Launches Acer eSettings Management in Acer Empowering Technology. Launches Acer ePower Management in Acer Empowering Technology. Switches display output between the display screen, external monitor if connected and both. Turns the...

POST Codes Tables

Disable Non-Maskable Interrupt NMI Initialize chipset with initial POST values Initialize caches to initial POST values Load alternate registers with initial POST values Restore CPU control word during warm boot Initialize PCI Bus Mastering devices Initialize cache before memory autosize Reset Programmable Interrupt Controller RAM failure on data bits xxxx of low byte of memory bus Enable cache before system BIOS shadow RAM failure on data bits xxxx of high byte of memory bus Advanced...

Security

The Security screen contains parameters that help safeguard and protect your computer from unauthorized use. Supervisor Password Is User Password Is HDD Password Supervisor Password controls access to the setup utility. It can be used to boot up when Password on boot is enabled. The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. Shows the setting of the Supervisor password Shows the setting of the user password. Shows...

Clearing Password Check and BIOS Recovery

Reset Cmos Aspire 3690

This section provide you the standard operating procedures of clearing password and BIOS recovery for Aspire 6530. Aspire 6530 provide one Hardware Open Gap on main board for clearing password check, and one Hotkey for enabling BIOS Recovery. Clearing Password Check Hardware Open Gap Description Steps for Clearing BIOS Password Check If users set BIOS Password Supervisor Password and or User Password for a security reason, BIOS will ask the password during systems POST or when systems enter to...

Easy Launch Buttons

Located beside the keyboard are application buttons. These buttons are called easy-launch buttons. They are WLAN, Internet, email, Bluetooth, Arcade and Acer Empowering Technology. The mail and Web browser buttons are pre-set to email and Internet programs, but can be reset by users. To set the Web browser, mail and programmable buttons, run the Acer Launch Manager. Launch Acer Empowering Technology. user-programmable Internet browser user-Programmable Email application user-Programmable...

External Modules Disassembly Flowchart

Usb Carrier Board

The flowchart below gives you a graphic representation on the entire disassembly sequence and instructs you on the components that need to be removed during servicing. For example, if you want to remove the main board, you must first remove the keyboard, then disassemble the inside assembly frame in that order.

Replacing the Second Hard Disk Drive Module

Replacing Hardisk Acer Travelmate

Place the HDD in the HDD carrier. 2. Replace the four screws to secure the carrier. 1. Place the HDD in the HDD carrier. 2. Replace the four screws to secure the carrier. 3. Replace the HDD and slide to the right to connect 4. Replace the two securing screws as shown. the HDD interface. 3. Replace the HDD and slide to the right to connect 4. Replace the two securing screws as shown. the HDD interface.

How To Format Acer Aspire 6530

The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery. Quiet Boot Network Boot F12 Boot Menu D2D Recovery Enabled Enabled Disabled Enabled lt Tab gt , lt Shift-Tab gt , or lt Enter gt selects field. NOTE The screen above is for your reference only. Actual values may differ. Settings in boldface are the default and suggested parameter settings. Sets the system time. The hours are displayed with 24hour format. Format HH MM SS hour...

Indicators

The computer has several easy-to-read status indicators The front panel indicators are visible even when the computer cover is closed. Indicates the status of Bluetooth communication. Indicates the status of wireless LAN communication. Indicates the computer s power status. Indicates the computer s battery status. Indicates when the hard disk drive is active. Lights up when Num Lock is activated. Lights up when Caps Lock is activated. NOTE 1. Charging The battery light shows amber when the...

BIOS Setup Utility

The BIOS Setup Utility is a hardware configuration program built into your computer s BIOS Basic Input Output System . Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4 Troubleshooting when problem arises. To activate the BIOS Utility, press F2 during POST when Press lt F2 gt to enter Setup message is prompted on the bottom of screen ....

LCD Module Reassembly Procedure Replacing the LCD Panel

Aspire 6530 Disassembly

Align the LCD brackets with the eight screw holes four on each side on the LCD Panel as shown. 1. Align the LCD brackets with the eight screw holes four on each side on the LCD Panel as shown. 2. Secure the LCD brackets to the LCD panel. 3. Turn the panel over. Insert the LCD Panel cable into the LCD Panel as shown. Secure the cable by replacing the securing strip. 3. Turn the panel over. Insert the LCD Panel cable into the LCD Panel as shown. Secure the cable by replacing the securing...

FRU Field Replaceable Unit List

This chapter gives you the FRU Field Replaceable Unit listing in global configurations of Aspire 6530. Refer to this chapter whenever ordering for parts to repair or for RMA Return Merchandise Authorization . Please note that WHEN ORDERING FRU PARTS, you should check the most up-to-date information available on your regional web or channel. For whatever reasons a part number change is made, it will not be noted on the printed Service Guide. For ACER AUTHORIZED SERVICE PROVIDERS, your Acer...

BIOS Recovery by Crisis Disk

BIOS Recovery Boot Block is a special block of BIOS. It is used to boot up the system with minimum BIOS initialization. Users can enable this feature to restore the BIOS firmware to a successful one once the previous BIOS flashing process failed. The system provides a function hotkey Fn Esc, for enable BIOS Recovery process when system is powered on during BIOS POST. To use this function, it is strongly recommended to have the AC adapter and Battery present. If this function is enabled, the...

BIOS Flash Utility

The BIOS flash memory update is required for the following conditions New versions of system programs Restore a BIOS when it becomes corrupted. Use the Phlash utility to update the system BIOS flash ROM. NOTE Create a Crisis Recovery Media such as USB HDD before you use the Phlash utility. NOTE Do not install memory-related drivers XMS, EMS, DPMI when you use the Phlash. NOTE Please use the AC adaptor power supply when you run the Phlash utility. If the battery pack does not contain enough...

Aspire FRU List

ADAPTER 65W 3PIN DELTA SADP-65KB DFA Adapter DELTA 65W SADP-65KB BFJA LV4 LF for OBL ADAPTER LITE-ON 90W 19V BLUE PA-1900-24AR LED LF ADAPTER HIPRO 90W 19V BLUE HP-OL093B13P LED LF LEVEL 4 Adapter DELTA 90W ADP-90SB BBEN for OBL Spec. LV4 LF Battery SANYO AS-2007B Li-Ion 3S2P SANYO 6 cell 4400mAh Main COMMON Normal Type Battery SONY AS-2007B Li-Ion 3S2P SONY 6 cell 4400mAh Main COMMON Normal Type Battery PANASONIC AS-2007B Li-Ion 3S2P PANASONIC 6 cell 4400mAh Main COMMON PSS Battery SIMPLO...

Hardware Specifications and Configurations

AMD S1g2 Processor Griffin Series-Turion Sempron , T3 1.2 2.6G s Bandwidth 9.6GB s to 20.8GB s Hyper Transport 3.0 Technology.Designed to support HT Gen 3 speed form 1.2Ghz to 2.6Ghz 64-bit or 128-bit DDR2 Memory Interface, Two independent 64 Bit DDR2 channels Split Power Planes, Separate power planes providesd for each CPU core and on die Northbridge Up to 2 processor core per die, Upto 1MB L2 cache per die Each CPU core supports up to 8 P-states P0 Highest performance and P7 Lowest VDD0,VDD1...

Removing the Optical Disk Drive Module

See Removing the Battery Pack on page 44. 2. Remove the Lower Cover. See Removing the Lower Covers on page 47. 3. Remove the screw securing the ODD module. 4. Grasp the ODD module as shown and pull out of the bay. 4. Grasp the ODD module as shown and pull out of the bay. 5. Remove the two screws securing the ODD bracket and remove the ODD bracket from the optical disk drive module. 6. Insert a pin in the eject hole of the ODD to eject the ODD tray. 6. Insert a pin in the eject hole of the...