Removing the Vgamxm Card

NOTE: The following procedure outlines the removal steps for models supporting VGA Cards. The procedure for MXM Cards requires the removal of two screws, though the remaining steps are identical.

  1. See "Removing the Mainboard" on page 91.
  2. Remove the single screw securing the VGA Card to the Mainboard.

NOTE: MXM cards are secured with and additional screw as indicated by the green callout.

Acer 4935g Bios Chip

Step

Size

Quantity

Screw Type

VGA/MXM

M2.5*3

1 or 2

  1. Remove the VGA Card from the Mainboard connector.
  2. Remove the VGA Card from the Mainboard connector.
Aspire 9410z Vga Chip

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Responses

Post a comment