Removing the Optical Drive Module

  1. See "Removing the Lower Covers" on page 47.
  2. Remove the single screw securing the ODD module.

Step

Size

Quantity

Screw Type

ODD Module

M2.5*5

1

<>*

  1. Insert a suitable object in to the Lower Cover to push the ODD Module clear of the casing.
  2. Pull the ODD Module out of the chassis.
5. Remove the two screws securing the ODD Bracket and remove the ODD bracket from the module.

Step

Size

Quantity

Screw Type

ODD Bracket

M2*3

2

  1. Insert a pin in the eject hole of the ODD to eject the ODD tray.
  2. Insert a pin in the eject hole of the ODD to eject the ODD tray.

7. Press down on the locking catch to release the ODD cover and remove.

Was this article helpful?

0 0

Post a comment