Removing the Media Board

  1. See "Removing the Upper Cover" on page 59.
  2. Turn the Upper Cover over and lift the Media Board FFC to disconnect the adhesive.

3. Turn the Upper Cover over. Lift the Media Board cover, left side first, and remove the cover from the Upper Cover.

4. Press down the securing latch (1) and push the Media Board in the direction of the arrow (2) to disengage the securing clips.

5. Lift the Media Board away from the Upper Cover (1) and feed the FFC through the Upper Cover (2) to remove the Media Board.

Was this article helpful?

0 0

Post a comment