Removing the Button Board and Finger Print Reader

  1. See "Removing the Upper Cover" on page 59.
  2. Lift the Button Board FFC to detach the adhesive holding it in place.

3. Remove the two screws securing the Button Board and Finger Print Reader to the Upper Cover.

Step

Size

Quantity

Screw Type

Button Board

M2.5*5

2

<>*

  1. Lift the modules clear of the Upper Cover.
  2. Lift the modules clear of the Upper Cover.
5. Open the FFC locking latch and disconnect the Finger Print Reader FFC from the Button Board.
6. Remove Button Board from the bracket.

7. Turn the bracket over and remove the two screws securing the Finger Print Reader to the bracket.

Step

Size

Quantity

Screw Type

Finger Print Reader

M2*3

2

*>

8. Remove the Finger Print Reader from the bracket as shown.

Was this article helpful?

0 0

Post a comment