The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery.

System Time:

^ 10:59]

System Date:


Total Memory:

4095 MB

Video Memory:

512 MB

Quick Boot


Network Boot


F12 Boot Menu


D2D Recovery






Help Select Item Exit Select Menu

F5 En

Change Values ^KQ Setup Default Select ► SubMenu BFM Save and Exit

NOTE: The screen above is for your reference only. Actual values may differ.

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.




System Time

Sets the system time. The hours are displayed with 24hour format.

Format: HH:MM:SS (hour:minute:second)

System Date

Sets the system date.

Format MM/DD/YYYY (month/day/year)

System Memory

This field reports the memory size of the system. Memory size is fixed to 2047 MB.


Video Memory

This field reports the memory allocated for video graphics. Memory size is fixed to 64 MB.


Quick Boot

Allows startup to skip certain tests while booting, decreasing the time needed to boot the system.

Option: Enabled or Disabled

Network Boot

Enables, disables the system boot from LAN (remote server).

Option: Enabled or Disabled

F12 Boot Menu

Enable the Press <F12> to display Boot Menu message during boot.

Option: Enabled or


D2D Recovery

Enables, disables D2D Recovery function. The function allows the user to create a hidden partition on hard disc drive to store operation system and restore the system to factory defaults.

Option: Enabled or Disabled


Control the mode in which the SATA controller should operate.

Option: AHCI or IDE

Was this article helpful?

0 0

Post a comment