Using DMITools

The DMI (Desktop Management Interface) Tool copies BIOS information to eeprom to be used in the DMI pool for hardware management.

When the BIOS displays Verifying DMI pool data it is checking the table correlates with the hardware before sending to the operating system (Windows, etc.).

To update the DMI Pool, perform the following steps:

  1. Boot into DOS.
  2. Execute dmitools.exe. The following messages are displayed on the screen to prompt the dmitools mode.
  • dmitools /r ==> Read dmi string from bios
  • dmitools /wm xxxx ==> Write manufacturer name to eeprom
  • dmitools /wp xxxx ==> Write product name to eeprom
  • dmitools /ws xxxx ==> Write serial number to eeprom
  • dmitools /wu xxxx ==> Write uuid to eeprom
  • dmitools /wa xxxx ==> Write asset tag to eeprom

The following examples show the commands and the corresponding output information.

Read DMI Information from Memory Input:

dmitools /r Output:

Manufacturer (Typel, 0ffset04h): Acer

Product Name (Typel, 0ffset05h): TravelMate xxxxx

Serial Number (Typel, 0ffset07h): 01234567890123456789

UUID String (Typel, 0ffset08h): xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx

Asset Tag (Type3, 0ffset04h): Acet Asstag

Write Product Name to EEPROM Input:

dmitools /wp Acer

Write Serial Number to EEPROM Input:

dmitools /ws 01234567890123456789

4). Write UUID to EEPROM (Create UUID from Intel WFM20.pdf) Input:

dmitools /wu

5). Write Asset Tag to EEPROM Input:

dmitools /wa Acet Asstag NOTE: When using any of the Write options, restart the system to make the new DMI data effective.

Using the ICW50/ICY70 LAN MAC Utility

You can use the MAC.BAT utility to write the MAC.CFG file to the EEPROM under DOS mode.

1. Use a text editor (for example: Notepad) to open the MAC.CFG file. You can see the MAC.CFG contents as below:

Title= HAC Address byte WriteData='001122334455' Startfiddr=7fi WriteLeng=ö KeepByte=0

WriteData = '001122334455' StartAddr=7A WriteLeng=6 KeepByte=0

MAC value MAC address MAC value length don't care

2. In DOS mode, run the MAC.BAT file to write MAC values to eeprom.

C : \hflOmac . bat C:\l1ftOeeproM u MAC.cfg Progress —> N Write Data to EEPROM OKff

Was this article helpful?

+1 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook

Post a comment