Separating the Upper Case from the Lower Case

10. See

Removing the Battery Pack" on page 36. Removing the SD Dummy Card" on page 37. Removing the DIMM Module" on page 38. Removing the Back Cover" on page 39. Removing the Hard Disk Drive Module" on page 40. Removing the WLAN Modules" on page 43. Removing the Optical Drive Module" on page 44. Removing the Middle Cover" on page 47. Removing the Keyboard" on page 49. Removing the LCD Module" on page 50.

11. Remove the three screws (F) from the middle cover.

Size (Quantity)

Color

Torque

Part No.

M2 x L4 (3)

Silver

1.6 kgf-cm

86.9A552.4R0

  1. Release the latch and disconnect the volume button board cable from its connector the main board.
  2. Release the latch and disconnect the volume button board cable from its connector the main board.
5738 Board Cable

13. Release the latch and disconnect the touch pad cable from TPCN1 connector on the main board.

14. Release the latch and disconnect the touchpad button cable from FPCN1 connector on the main board.

17. Remove the ten screws (A) securing the lower case to the upper case.

Size (Quantity)

Color

Torque

Part No.

M2.5 x L8 (10)

Black

3.0 kgf-cm

86.00E34.738

18. Gently detach the upper case from the lower case.

19. Remove the upper case.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Responses

  • kathryn
    How to remove back case of acer 5740?
    7 years ago
  • Daisy
    How to Disconnect the cable from the media control buttons connector?
    7 years ago

Post a comment