Removing the USB Board Module

1.

See

'Removing the Battery Pack" on page 36.

2.

See

'Removing the SD Dummy Card" on page 37.

3.

See

'Removing the DIMM Module" on page 38.

4.

See

'Removing the Back Cover" on page 39.

5.

See

'Removing the Hard Disk Drive Module" on page 40.

6.

See

'Removing the WLAN Modules" on page 43.

7.

See

'Removing the Optical Drive Module" on page 44.

8.

See

'Removing the Middle Cover" on page 47.

9.

See

'Removing the Keyboard" on page 49.

10.

See

'Removing the LCD Module" on page 50.

11.

See

'Separating the Upper Case from the Lower Case" on page 53

12. Disconnect the cables from the USB board module.

13. Remove the one screw (F) securing the USB board module to the lower case.

Size (Quantity)

Color

Torque

Part No.

M2 x L4 (1)

Silver

1.6 kgf-cm

86.9A552.4R0

14. Remove the USB board module from the lower case.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment