Removing the LCD Bezel

  1. See "Removing the Battery Pack" on page 36.
  2. See "Removing the SD Dummy Card" on page 37.
  3. See "Removing the DIMM Module" on page 38.
  4. See "Removing the Back Cover" on page 39.
  5. See "Removing the Hard Disk Drive Module" on page 40.
  6. See "Removing the WLAN Modules" on page 43.
  7. See "Removing the Optical Drive Module" on page 44.
  8. See "Removing the Middle Cover" on page 47.
  9. See "Removing the Keyboard" on page 49.
  10. See "Removing the LCD Module" on page 50.
  11. Remove the four screw covers from the top and bottom of the LCD bezel.
Aspire 7520g Back Screws

12. Remove the four screws (B) on the LCD module as shown.

Size (Quantity)

Color

Torque

Part No.

M2.5 x L6 (4)

Black

3.0 kgf-cm

86.00E12.536

13. Carefully pry open the LCD bezel and remove it from the LCD panel.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment