Removing the Thermal Module

  1. See "Removing the Mainboard" on page 80.
  2. Turn the Mainboard over and place on a clean surface.
  3. Hold the fan cable connector and lift to disconnect from the mainboard.

4. Loosen the three captive screws from the Thermal Module CPU heat sink in reverse numerical order, from 3 to 1.

5. Remove the four screws from the Thermal Module.

Step

Size

Quantity

Screw Type

CPU Thermal Module

M2.5*3

4

WARNING:To prevent damage to the Thermal Module or the CPU, hold and lift the Thermal Module by lifting both ends up and away at the same time. 6. Hold the module on both sides and lift it clear of the Mainboard.

IMPORTANT: If the replacement Thermal Module does not include the thermal protection pads shown below, reuse the original thermal protection pad with the new Thermal Module.

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Post a comment