Removing the Memory System Fan Thermal ModuleCPU

  1. Remove the six screws fastening the thermal door. (M2.5*15(NL) for red circle; M2*3(NL) for yellow circle)
  2. Detach the thermal door from the notebook.
  3. Pop out the memory then remove it
  1. Use a tweezer to take out the fan cable as shown.
  2. Disconnect the fan cable from the main board.
  1. Remove the two screws fastening the system fan.
  2. Take out the system fan from the main unit.
  1. Remove the four screws fastening the thermal module.
  2. Then detach the thermal module carefully.
  1. Use a flat-headed screwdriver to release the CPU lock (Turn anti-clockwise).
  2. Detach the CPU from the CPU socket carefully.
  1. Tear off the tape fastening the antenna set.
  2. Then remove the antenna protection cover.
  1. Remove the screw holding the mini cover.
  2. Detach the mini cover from the main unit.

Was this article helpful?

0 0

Post a comment