Removing the LCD Module

  1. Open the LCD module as shown (See the left and the middle picture).
  2. Detach the middle cover from the main unit carefully.
  1. Remove the screw fastening the keyboard.
  2. Then turn over the keyboard as shown.
  3. Disconnect the keyboard cable from the main board.
  1. Turn over the notebook, remove two screws fastening the LCD module on the bottom.
  2. Then turn the notebook to the front side. Take out the antenna then disconnect the LCD cable (See the middle and the right images).
  1. Remove four screws fastening the LCD module (M2.5*10(NL) for yellow circles; M2.5*15(NL) for red circles).
  2. Then detach the entire LCD module from the main unit carefully.

Was this article helpful?

0 0

Post a comment