Disassembling the Upper Case Assembly

  1. Remove the two screws fastening the media board.
  2. Take out the media board cable from the lower case as shown.
  3. Detach the media board from the upper case carefully.

NOTE: Only Aspire 5650 series have media board.

  1. Tear off the mylar on top of the touchpad bracket.
  2. Remove the screws holding the touchpad bracket.
  3. Then detach the touchpad bracket from the uppwer case.
  1. Disconnect the touchpad FFC.
  2. Then remove the touchpad FFC from the touchpad.
  3. Detach the touchpad from the upper case.

Was this article helpful?

0 0

Post a comment