Removing the Wireless LAN Cardthe HDD Modulethe Memorythe ODD Module and the LCD Module

Removing the Memory and the HDD Module

  1. Remove the five screws fastening the DIMM cover.
  2. Detach the DIMM cover carefully.
  1. Pop out the memory carefully.
  2. Disconnect wireless main and auxiliary antenna from the wireless LAN card.
  3. Pop out the wireless LAN card and remove it.
  1. Remove the three screwss fastening the HDD cover.
  2. Detach the HDD cover from the main unit.
  1. Remove the four screws fastening the HDD module.
  2. Then detach the HDD module carefully.

Removing the ODD Module

  1. First, remove the screw fastening the ODD module as shown.
  2. Push the ODD module outwards then remove it.

Removing the LCD Module

  1. Detach the middle cover from the main uiit carefully.
  2. Disconnect the launch board FFC from the launch board.
  1. Remove the middle cover (with launch board and microphone) from the main unit.
  2. Disconnect the microphone cable from the launch board.
  1. Take out the microphone from the middle cover.
  2. Remove the two screws fastening the launch board.
  3. Then remove the launch board from the middle cover.
  1. Remove the screw holding the keyboard.
  2. Turn over the keyboard as shown.
  3. Disconnect the keyboard cable.
  1. Remove the keyboard from the main unit.
  2. Tear off the tapes fastening the wireless antenna cable.
  1. Pull the antenna set from the main unit.
  2. Disconnect the LCD cable.
  3. Turn over the notebook then remove two screws fastening the LCD module.

u

Tfe

. .,.

- ยง

im

. r*

  1. Remove two screws fastening the LCD hinges.
  2. Then detach the LCD module from the main unit.

Was this article helpful?

0 0

Post a comment