Fazer Boot No Acer Aspire 5542g

The Exit screen contains parameters that confirmed or discard the changes made to the parameters in the BIOS Setup Utility.

Phoenix SecureCore(tm) Setup Utility

Exit Saving Changes

Exit Saving Changes

Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes

Item Specific Help

Exit System Setup and save your changes to CMOS.

II

F1 Esc

Help Select Item H/^l Change Values Exit K9 Select Menu Select ► Sub-Menu

F9 F10

Setup Defaults Save and Exit

The table below describes the parameters in this screen.

Parameter

Description

Exit Saving Changes

Exit System Setup and save your changes to CMOS.

Exit Discarding Changes

Exit utility without saving setup data to CMOS.

Load Setup Default

Load default values for all SETUP item.

Discard Changes

Load previous values from CMOS for all SETUP items.

Save Changes

Save Setup Data to CMOS.

BIOS Flash Utility

The BIOS flash memory update is required for the following conditions:

  • New versions of system programs
  • New features or options
  • Restore a BIOS when it becomes corrupted. Use the Flash utility to update the system BIOS flash ROM.

NOTE: If you do not have a crisis recovery disk at hand, then you should create a Crisis Disk (See "Creating the Crisis Disk in Windows" on page 117)before you use the Flash utility.

NOTE: Do not install memory-related drivers (XMS, EMS, DPMI) when you use the Flash.

NOTE: Please use the AC adaptor power supply when you run the Flash utility. If the battery pack does not contain enough power to finish BIOS flash, you may not boot the system because the BIOS is not completely loaded.

Follow the steps below to run the Flash utility:

  1. Rename the BIOS file as "XXXXXXX.FD"
  2. Copy the "XXXXXXX.FD" file to a bootable USB device containing the Crisis Disk.
  3. Turn off the system power.
  4. Insert the USB device containing the renamed BIOS file and Crisis Disk to any USB port.
  5. Make sure the AC adapter is connected to a power outlet and plugged in to the system.
  6. Power on the system from an off state (i.e. cold boot) while holding down the Fn + ESC key.
  7. After POST, release Fn + ESC key. The system should boot from the USB device and perform crisis recovery action.
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Responses

  • RALPH
    How to Flash Bios Acer Aspire 5536 by USB?
    8 years ago
  • väinö liikanen
    How to flash acer 5536g bios?
    8 years ago

Post a comment