Disassembling the LCD Module

  1. Remove the four screw caps as shown.
  2. Remove the four screws holding the LCD bezel.
  3. Then detach the LCD bezel from the LCD module.
  1. Remove the two screws fastening the LCD inverter.
  2. Take out the LCD inverter from the LCD cover, then disconnect the LCD cable from the inverter.
  3. Remove the two screws holding the LCD to the LCD panel.
  1. Remove the LCD assembly from the LCD panel as shown.
  2. Remove the two screws fastening the wireless antenna set.
  3. Detach the wireless antenna set from the LCD panel on one side.
  1. Detach the wireless antenna set on the other side.
  2. Remove the two screws fastening the LCD hinges.
  3. Then remove the LCD hinges from the LCD panel.
  1. Tear off the tape fastening the LCD cable.
  2. Disconnect the LCD cable from the LCD.
  3. Tear off another tape holding the LCD cable.
  1. Remove the four screws fastening the LCD right bracket.
  2. Remove the right bracket from the LCD.
  1. Remove the four screws fastening the LCD left bracket.
  2. Remove the left bracket from the LCD.

Disassembling the LCD Module (with video camera)

  1. Remove the four screw caps as shown.
  2. Remove the four screws holding the LCD bezel.
  3. Then detach the LCD bezel from the LCD module.
  1. Remove the two screws fastening the LCD inverter.
  2. Take out the LCD inverter from the LCD cover, then disconnect the LCD cable from the inverter.
  3. Remove the two screws holding the digital camera to the LCD panel.
  1. Detach the CCD panel from the CCD bezel assembly.
  2. Disconnect digital camera to LCD cable as shown.
  3. Remove the two screws fastening the CCD.
  1. Take out the CCD from the CCD bezel.
  2. Then remove the CCD hinge from the CCD bezel.
  3. Slide the CCD latch to the right to remove the CCD latch.

NOTE: The edges of the CCD latch is very fragile, please practice this step very carefully.

  1. Take out the LCD assembly from the LCD panel.
  2. Disconnect the LCD cable from the LCD.
  3. Tear off the tape fastening the LCD cable and detach the LCD cable from the LCD.
  1. Remove the two screws holding the wireless antenna set to the LCD panel.
  2. Take out the wireless antenna set from the LCD panel.
  3. Remove the two screws holding the LCD hinges then remove the hinges.
  1. Remove the four screws fastening the LCD right bracket.
  2. Remove the right bracket from the LCD.
  1. Remove the four screws fastening the LCD left bracket.
  2. Remove the left bracket from the LCD.
0 0

Responses

  • Lloyd
    How to unplug the video cable of an lcd acer aspire 5590?
    8 years ago
  • lidya filmon
    How to take fascia off acer aspire 5738?
    8 years ago
  • Ulpu Heinonen
    How to replace acer aspire 5540 lcd cover?
    8 years ago

Post a comment