Realtek Boot Agent Aspire One Boot From Netwerk

This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices includes the USB diskette drives, the onboard hard disk drive and the DVD drive in the module bay.

InsydeH20 Setup Utility

Information Main Advanced Security Power Boot Exit

Boot priority order:

InsydeH20 Setup Utility

IDE0 : WDC WD2500BEVT-22ZCT0

  1. IDE1 : TSSTcorp CDDVDW TS-U633A
  2. USB FDD :
  3. Network Boot : Realtek Boot Agent
  4. USB HDD :
  5. USB CDROM :

Item Specific Help

Use <t > or <1 > to select a device, then press <F5> to move it down the list, or <F6> to move it up the list. Press <Esc> to escape the menu

Help Exit a

Select Select

Item Menu

Change Values Select ► SubMenu

Setup Default Save and Exit

Exit

The Exit screen allows you to save or discard any changes you made and quit the BIOS Utility.

Menus Bios Phoenix
The table below describes the parameters in this screen.

Parameter

Description

Exit Saving Changes

Exit System Setup and save your changes to CMOS.

Exit Discarding Changes

Exit utility without saving setup data to CMOS.

Load Setup Default

Load default values for all SETUP item.

Discard Changes

Load previous values from CMOS for all SETUP items.

Save Changes

Save Setup Data to CMOS.

The BIOS flash memory update is required for the following conditions:

  • New versions of system programs
  • New features or options
  • Restore a BIOS when it becomes corrupted.

Perform the following steps to use the DOS Flash Utility:

  1. Press F2 during boot to enter the Setup Menu.
  2. Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move USB HDD to position 1.

IDE1 : TSSTcorp CDDVDW TS-U633A

Network Boot : Realtek Boot Agent USB HDD : USB CDROM I

Use <t> or <!> to select a device, then press <F5> to move it down the list, or <F6> to move it up the list. Press <Esc> to escape the menu

IDE1 : TSSTcorp CDDVDW TS-U633A

Network Boot : Realtek Boot Agent USB HDD : USB CDROM I

Use <t> or <!> to select a device, then press <F5> to move it down the list, or <F6> to move it up the list. Press <Esc> to escape the menu

Change Values Select ► SubMenu

Setup Default Save and Exit

3. Execute the FLASH.BAT batch file to update BIOS. The flash process begins as shown.

Insyda Flash Utility Tor

InsydeH20

Uorslon 1.2m

InlHdlzlrq

riU loading IBS x

Current BIOS Hods] u

*G : JHTIfl

BIDS Hods I Ml

m ■■ Jona

CurrHirt BIOS vttrslDnï

ua.zi

BIBS wtton:

m.zs

1-1 m™-ic *t F m

Wm

4. In flash BIOS, the message Please do not remove AC Power Source displays. NOTE: If the AC power is not connected, the following message displays.

C:\it0nvlfl71fljflosti ji>MB0Z3

1 \H0HVjnTIB> flash it J«tl0023.fd /FE /B /DC

Uamning: Mo AC power connect

C:NR0HNJRT1B>_

IDUtXnV HDMETHEATt«

Plug in the AC power to continue.

5. Flash is complete when the message Flash programming complete displays.

Perform the following steps to use the WinFlash Utility:

  1. Double click the WinFlash executable.
  2. Click OK to begin the update. A progress screen displays.

3. When the process is complete, close all programs and applications and reboot the system.

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Responses

Post a comment