Separating the Upper Case from the Lower Case

1.

See

'Removing the

Battery Pack" on page 50.

2.

See

'Removing the

SD dummy card" on page 51.

3.

See

'Removing the

ExpressCard dummy card" on page 51

4.

See

'Removing the

Lower Cover" on page 52.

5.

See

'Removing the

DIMM" on page 53.

6.

See

'Removing the

WLAN Board Modules" on page 54.

7.

See

'Removing the

Hard Disk Drive Module" on page 56.

CO

See

'Removing the

Optical Drive Module" on page 58.

9.

See

'Removing the

Middle Cover" on page 62.

10.

See

'Removing the

Keyboard" on page 63.

11.

See

'Removing the

Heatsink Fan Module" on page 64.

12.

See

'Removing the

CPU Heatsink Module" on page 65.

13.

See

'Removing the

CPU" on page 66.

14.

See

'Removing the

LCD Module" on page 67.

  1. Disconnect the touchpad cable from the TPAD1 connector on the main board.
  2. Disconnect the touchpad cable from the TPAD1 connector on the main board.
Upper Case

17. Disconnect the speaker cable from the INTSPK1 connector on the main board.

18. Remove the eleven screws (11 x A, 1 x G) from the bottom panel.

Step

Size (Quantity)

Color

Torque

1~11

M2.5 x L8 (11)

Black

3.0 kgf-cm

12

M2 x L4 (1)

Black

3.0 kgf-cm

19. Turn the unit over and remove the three screws (G) from the top panel.

Step

Size (Quantity)

Color

Torque

1~3

M2 x L4 (3)

Black

3.0 kgf-cm

  1. Gently remove the upper case from the lower case.
  2. Gently remove the upper case from the lower case.
Travelmate 3000 Main Board
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment