Removing the Touchpad Module

1.

See

'Removing the Battery Pack" on page 50.

2.

See

'Removing the SD dummy card" on page 51.

3.

See

'Removing the ExpressCard dummy card" on page 51

4.

See

'Removing the Lower Cover" on page 52.

5.

See

'Removing the DIMM" on page 53.

6.

See

'Removing the WLAN Board Modules" on page 54.

7.

See

'Removing the Hard Disk Drive Module" on page 56.

8.

See

'Removing the Optical Drive Module" on page 58.

9.

See

'Removing the Middle Cover" on page 62.

10.

See

'Removing the Keyboard" on page 63.

11.

See

'Removing the Heatsink Fan Module" on page 64.

12.

See

'Removing the CPU Heatsink Module" on page 65.

  1. See "Removing the CPU" on page 66.
  2. See "Removing the LCD Module" on page 67.
  3. See "Separating the Upper Case from the Lower Case" on page 70.
  4. Remove the touchpad cable that is glued to the bracket.

17. Disconnect the touchpad cable from the touchpad board.

Touchpad Module

18. Remove the two screws (C) securing the bracket to the upper case.

Step

Size (Quantity)

Color

Torque

1~2

M2 x L2 (2)

Silver

1.6 kgf-cm

  1. Remove the touchpad bracket.
  2. Remove the touchpad bracket.

20. Carefully pry loose and remove the touch pad board.

Touch Pad Contoller Board

WARNING:The touchpad board is glued to the upper case, only remove the touchpad board if it is defective.

Removing the

Modem Board

1.

See

'Removing

the Battery Pack" on page 50.

2.

See

'Removing

the SD dummy card" on page 51.

3.

See

'Removing

the ExpressCard dummy card" on page 51

4.

See

'Removing

the Lower Cover" on page 52.

5.

See

'Removing

the DIMM" on page 53.

6.

See

'Removing

the WLAN Board Modules" on page 54.

7.

See

'Removing

the Hard Disk Drive Module" on page 56.

CO

See

'Removing

the Optical Drive Module" on page 58.

9.

See

'Removing

the Middle Cover" on page 62.

10.

See

'Removing

the Keyboard" on page 63.

11.

See

'Removing

the Heatsink Fan Module" on page 64.

12.

See

'Removing

the CPU Heatsink Module" on page 65.

  1. See "Removing the CPU" on page 66.
  2. See "Removing the LCD Module" on page 67.
  3. See "Separating the Upper Case from the Lower Case" on page 70.
  4. Remove the one screw (C) securing the modem card.

Step

Size (Quantity)

Color

Torque

1

M2 x L3 (1)

Silver

1.6 kgf-cm

  1. Lift the modem board from the main board.
  2. Lift the modem board from the main board.

18. Disconnect the cable from the modem board.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment