Removing the Speaker Module

1.

See

'Removing the Battery Pack" on page 50.

2.

See

'Removing the SD dummy card" on page 51.

3.

See

'Removing the ExpressCard dummy card" on page 51

4.

See

'Removing the Lower Cover" on page 52.

5.

See

'Removing the DIMM" on page 53.

6.

See

'Removing the WLAN Board Modules" on page 54.

7.

See

'Removing the Hard Disk Drive Module" on page 56.

8.

See

'Removing the Optical Drive Module" on page 58.

9.

See

'Removing the Middle Cover" on page 62.

10.

See

'Removing the Keyboard" on page 63.

  1. See "Removing the Heatsink Fan Module" on page 64.
  2. See "Removing the CPU Heatsink Module" on page 65.
  3. See "Removing the CPU" on page 66.
  4. See "Removing the LCD Module" on page 67.
  5. See "Separating the Upper Case from the Lower Case" on page 70.
  6. Remove the four screws (C) securing the speaker module.

Step

Size (Quantity)

Color

Torque

1~4

M2 x L3 (4)

Silver

1.6 kgf-cm

  1. Remove the tape covering the speaker cable.
  2. Remove the tape covering the speaker cable.
18. Release the speaker cable from the latches.
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment