Removing the LCD Brackets

  1. See "Removing the Battery Pack" on page 50.
  2. See "Removing the SD dummy card" on page 51.
  3. See "Removing the ExpressCard dummy card" on page 51.
  4. See "Removing the Lower Cover" on page 52.
  5. See "Removing the WLAN Board Modules" on page 54.
  6. See "Removing the Middle Cover" on page 62.
  7. See "Removing the Heatsink Fan Module" on page 64.
  8. See "Removing the CPU Heatsink Module" on page 65.
  9. See "Removing the LCD Module" on page 67.
  10. See "Removing the LCD Bezel" on page 88.
  11. See "Removing the LCD panel with the Brackets" on page 89.
  12. See "Removing the Inverter Board and FPC Cable" on page 90.
  13. Remove the four screws (4 x F) securing the left and right LCD brackets to remove the brackets.

Step

Size (Quantity)

Color

Torque

1~4

M2 x L4 (4)

Silver

1.0 kgf-cm

Removing the Antennas

i.

See

'Removing the Battery Pack" on page 50.

2.

See

'Removing the SD dummy card" on page 51.

3.

See

'Removing the ExpressCard dummy card" on page 51.

4.

See

'Removing the Lower Cover" on page 52.

5.

See

'Removing the WLAN Board Modules" on page 54.

6.

See

'Removing the Middle Cover" on page 62.

7.

See

'Removing the Heatsink Fan Module" on page 64.

8.

See

'Removing the CPU Heatsink Module" on page 65.

9.

See

'Removing the LCD Module" on page 67.

10.

See

'Removing the LCD Bezel" on page 88.

ii.

See

'Removing the LCD panel with the Brackets" on page 89

12.

Release the antenna cables from the aluminium tapes.

Cover Acer 5535

13. Remove the left and right antenna cables together with the tapes holding them in place.

NOTE: There is no need to remove the antenna unless you really need to replace it.

Removing the

Web Camera

1.

See

'Removing

the Battery Pack" on page 50.

2.

See

'Removing

the SD dummy card" on page 51.

3.

See

'Removing

the ExpressCard dummy card" on page 51.

4.

See

'Removing

the Lower Cover" on page 52.

5.

See

'Removing

the WLAN Board Modules" on page 54.

6.

See

'Removing

the Middle Cover" on page 62.

7.

See

'Removing

the Heatsink Fan Module" on page 64.

CO

See

'Removing

the CPU Heatsink Module" on page 65.

9.

See

'Removing

the LCD Module" on page 67.

10.

See

'Removing

the LCD Bezel" on page 88.

11.

See

'Removing

the LCD panel with the Brackets" on page 89

12. Remove the Web camera from the back cover.

Extensa 5235 Inverter
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment