Information

The Information screen displays a summary of your computer hardware information.

Information

Main

InsydeH20 Setup Utility

Advanced Security Power Boot Exit

CPU Type CPU Speed

HDD Model Name: HDD Serial Number: ATAPI Model name:

System BIOS Version: VGA BIOS Version:

Serial Number: Asset Tag Number: Product Name: Manufacturer Name: UUID:

AMD Athlon(tm) X2 Dual Core Processor L310 1200 MHz

WDC WD2500BEVT-22ZCT0 WD-WXE409NM6664 TSSTcorp CDDVDW TS-U633A

v0.14

ATI VGA VER01.022.002.002.033268

Aspire 5534 Acer

65E9A02C-F302-62AB-07B1-00235A9C17AE

Change Values Select ► SubMenu

Setup Default Save and Exit

NOTE: The system information is subject to different models.

Parameter

Description

CPU Type

This field shows the CPU type and speed of the system.

CPU Speed

This field shows the speed of the CPU.

HDD Model Name

This field shows the model name of HDD installed on primary IDE master.

HDD Serial Number

This field displays the serial number of HDD installed on primary IDE master.

ATAPI Model Name

This field displays the model name of the installed ODD drive.

System BIOS Version

Displays system BIOS version.

VGA BIOS Version

This field displays the VGA firmware version of the system.

Serial Number

This field displays the serial number of this unit.

Asset Tag Number

This field displays the asset tag number of the system.

Product Name

This field shows product name of the system.

Manufacturer Name

This field displays the manufacturer of this system.

UUID Number

Universally Unique Identifier (UUID) is an identifier standard used in software construction, standardized by the Open Software Foundation (OSF) as part of the Distributed Computing Environment (DCE).

The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery.

InsydeH20 Setup Utility

InsydeH20 Setup Utility

System Time:

10:59]

System Date:

[06/09/2009]

Total Memory:

4096 MB

Video Memory:

[512MB]

Quick Boot

[Enabled]

Network Boot

[Enabled]

F12 Boot Menu

[Disabled]

D2D Recovery

[Enabled]

SATA Mode

Acer Aspire 7520g Serial

Help Exit a

Select Select

Item Menu

Change Values Select ► SubMenu

Setup Default Save and Exit

F9 F10

NOTE: The screen above is for your reference only. Actual values may differ.

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter

Description

Format/Option

System Time

Sets the system time. The hours are displayed with 24hour format.

Format: HH:MM:SS (hour:minute:second)

System Date

Sets the system date.

Format MM/DD/YYYY (month/day/year)

Total Memory

This field reports the memory size of the system. Memory size is fixed to 3017 MB.

N/A

Video Memory

Shows the video memory size. VGA Memory size=32 MB

N/A

Quick Boot

Allows startup to skip certain tests while booting, decreasing the time needed to boot the system.

Option: Enabled or Disabled

Network Boot

Enables, disables the system boot from LAN (remote server).

Option: Enabled or Disabled

F12 Boot Menu

Enables, disables Boot Menu during POST.

Option: Enabled or Enabled

D2D Recovery

Enables, disables D2D Recovery function. The function allows the user to create a hidden partition on hard disc drive to store operation system and restore the system to factory defaults.

Option: Enabled or Disabled

SATA Mode

Control the mode in which the SATA controller should operate.

Option: AHCI or IDE

The Advanced screen allows the user to configure the various advanced BIOS options.

IMPORTANT: Making incorrect settings to items on these pages may cause the system to malfunction. Unless you have experience adjusting these items, we recommend that you leave these settings at the default values. If making settings to items on these pages causes your system to malfunction or prevents the system from booting, open BIOS and choose Load Optimal Defaults in the Exit menu to boot up normally.

InsydeH20 Setup Utility

Rev. 3.5

ecurity Power Boot Exit

  • Boot Configuration
  • Peripheral Configuration
  • IDE Configuration
  • Video Configuration
  • USB Configuration
  • Chipset Configuration
  • ACPI Table/Features Control
  • CPU Related Setting
  • ASF Configuration

Item Specific Help

PCI Configuration.

HelP Select Item

Change Values Setup Default Select ► SubMenu BaBB Save and Exit

The table below describes the items, menus, and submenus in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter

Description

Submenu Items

Configuration

Enter the PCI Configuration menu

  • PCI Slot 4 IRQ Priority
  • PCI Slot 5 IRQ Priority
  • PCI Slot 6 IRQ Priority Manual IRQ selection does not guarantee a PCI slot device will be configured as chosen; PnP ISA cards are assigned resources first.

Boot

Configuration

Enter the Boot Configuration menu.

• Numlock

Parameter

Description

Submenu Items

Peripheral Configuration

Enter the Peripheral Configuration menu.

  • Peripheral Configuration:
  • Serial Port A
  • Serial Port B
  • Parallel Port
  • SB On-chip Device Configuration
  • OHCIO
  • OHCI1
  • OHCI2
  • OHCI3
  • OHCI4
  • EHCIO
  • EHCI1

• Azalia

Configuration

Enter the IDE Configuration menu.

  • IDE Controller
  • HDC Configure as
  • Primary IDE Cable Type
  • Serial ATA Port (0-5)
  • Channel 4 Master and Slave

Video

Configuration

Enter the Video Configuration menu.

  • Primary Video Adaptor
  • internal Video Mode
  • UMA Sharing memory size
  • Special features
  • IGD—Boot Type

Configuration

Enter the USB Configuration menu.

  • USB 2.0
  • USB Legacy

Chipset Configuration

Enter the Chipset Configuration menu.

  • PCI Express Configurations GPP Slots Power Limit, W Port 2-10 Features:
  • Gen2 High Speed Mode
  • Link ASPM
  • Link Width
  • Slots Power Limit, W
  • L1 Immediate ACK
  • Compliance Mode

ACPI Table/ Features Control

Enter the ACPI Table/Features Control menu.

  • FACP—C2 Latency Value
  • FACP—C3 Latency Value
  • FACP—RTC S4 Wakeup
  • APIC—IO APIC Mode
  • HPET—HPET Support
  • _OSC Method

CPU Related Setting

Enter the CPU Related Setting menu.

  • Memory Clock Control
  • HT Frequency Control
  • HT Width Control
  • CPU P-State Setting

Configuration

Enter the ASF Configuration menu

  • Mini WatchDog Timeout
  • Power-On Wait Time

The Security screen contains parameters that help safeguard and protect your computer from unauthorized use.

InsydeH20 Setup Utility

Information Main Advanced Security Power Boot Exit

Supervisor Password Is: Clear User Password Is: Clear

HDD Password Is: Clear

Set Supervisor Password

Set User Password Set IDE0 HDD Password

Power on password

[Disabled]

InsydeH20 Setup Utility

Supervisor Password Is: Clear User Password Is: Clear

HDD Password Is: Clear

Acer Bios Insydeh20

Item Specific Help

Install or Change the password and the length of password must be greater than one word.

Help Exit a

Select Select

Item Menu

Change Values Select ► SubMenu

Setup Default Save and Exit

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter

Description

Option

Supervisor Password Is

Shows the setting of the Supervisor password

Clear or Set

User Password Is

Shows the setting of the user password.

Clear or Set

Set Supervisor Password

Press Enter to set the supervisor password. When set, this password protects the BIOS Setup Utility from unauthorized access. The user can not either enter the Setup menu nor change the value of parameters.

Set User Password

Press Enter to set the user password. When user password is set, this password protects the BIOS Setup Utility from unauthorized access. The user can enter Setup menu only and does not have right to change the value of parameters.

Set Hdd Password

Enter HDD password.

Power on password

Defines whether a password is required or not while the events defined in this group happened. The following sub-options are all required the Supervisor password for changes and should be grayed out if the user password was used to enter setup.

Enabled or

Disabled

NOTE: When you are prompted to enter a password, you have three tries before the system halts. Don't forget your password. If you forget your password, you may have to return your notebook computer to your dealer to reset it.

Was this article helpful?

+1 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Responses

Post a comment