Driver Acer Aspire 5530 Dvdrom

The Power screen allows the user to configure CPU and power management options.

Information Main Advanced Security

Enable ACPI (debug only)

High Precision Event Timer [Yes]

PhoenixBIOS Setup Utility Power

Boot AMD Exit

Item Specific Help

Help Exit ti Select Item F5/ <—> Select Menu Ent

En/Disable ACPI BIOS (Advance Configuration and Power Interface) Debug only, remove this option for production.

6 Change Item ;r Select^Submenu

Setup Default Save and Exit

The table below describes the items, menus, and submenus in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter

Description

Option

Enable ACPI (debug only)

Enable or disable ACPI BIOS.

Yes or No

High Precision Event Timer

Enable or disable HPET.

Yes or No

This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices includes the USB diskette drives, the onboard hard disk drive and the DVD drive in the module bay.

Information Main Advanced Security Power

PhoenixBIOS Setup Utility

Boot

AMD Exit

Hitachi HTS542525K9SA00- (S

Boot priority order:

1. IDE0 :

  1. IDE1 : Slimtype DVD A DS8A2S-
  2. PCI LAN: MBA v11.0.3 Slot 0600
  3. USB HDD
  4. USB FDD
  5. USB KEY
  6. USB CD/DVD ROM

Help Exit

Help Exit

Select Item Select Menu

Select Item Select Menu

F5/F6 Enter

Item Specific Help

Use <t > or to select a device, then press <F6> to move it up the List, or <F5> to move it down the list. Press <Esc> to escape the menu.

Change Item Select^Submenu

F9 Set u F10_Si

Setup Default ave and Exit

The AMD screen allows the user to configure memory, thermal management options, and device wakeup behavior.

PhoenixBIOS Setup Utility

PhoenixBIOS Setup Utility

Phoenixbios Setup Utility

AMD Item Specific Help

Select Item Select Menu

Select Item Select Menu

Change Item er Select^Submenu

AMD Item Specific Help

Setup Default Save and Exit

Change Item er Select^Submenu

Setup Default Save and Exit

Parameter

Description

Submenu Items

CBS Options

Manage common platform BIOS settings.

  • Power Management
  • Thermal Control
  • DDR2 Memory & Memory Controller

PBS Options

  • Primary Display
  • Parallel ATA
  • On chip SATA
  • USB Host Controller
  • USB3 Controller
  • Legacy USB Support
  • OSC Support
  • System Time Lag Workaround
  • Thermal Fan Control

Exit

The Exit screen allows you to save or discard any changes you made and quit the BIOS Utility.

PhoenixBIOS Setup Utility

Information Main Advanced Security Power Boot AMD

Exit

Exit Saving Changes

Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes

Help Exit

Item Specific Help

Exit System Setup and save your changes to CMOS.

Select Item F5/F6 Change Item F9 Setup Default

Select Menu Enter Select^Submenu F10 Save and Exit

The table below describes the parameters in this screen.

Parameter

Description

Exit Saving Changes

Exit System Setup and save your changes to CMOS.

Exit Discarding Changes

Exit utility without saving setup data to CMOS.

Load Setup Default

Load default values for all SETUP item.

Discard Changes

Load previous values from CMOS for all SETUP items.

Save Changes

Save Setup Data to CMOS.

The BIOS flash memory update is required for the following conditions:

  • New versions of system programs
  • New features or options
  • Restore a BIOS when it becomes corrupted. Use the Phlash utility to update the system BIOS flash ROM.

NOTE: If you do not have a crisis recovery diskette at hand, then you should create a Crisis Recovery Diskette before you use the Phlash utility.

NOTE: Do not install memory-related drivers (XMS, EMS, DPMI) when you use the Phlash.

NOTE: Please use the AC adaptor power supply when you run the Phlash utility. If the battery pack does not contain enough power to finish BIOS flash, you may not boot the system because the BIOS is not completely loaded.

Fellow the steps below to run the Phlash.

  1. Prepare a bootable diskette.
  2. Copy the flash utilities to the bootable diskette.
  3. Then boot the system from the bootable diskette. The flash utility has auto-execution function.

Perform the following steps to use the DOS Flash Utility:

  1. Press F2 during boot to enter the Setup Menu.
  2. Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move USB HDD to position 1.
Bios Acer Aspire 7220

3. Execute the JALB028.BAT batch file from C:\JALB0_JALC0\BIOS\JALB028A to update BIOS. The flash process begins as shown.

Phoonlx Phlashl6 iltllltu «anion 1.6.7.8 Copyright <c) Phoe il Lh Tachnologlaa Ltd.. 2689-2087

J Load InsSB file JALBB2B.UPH

X Uerlfu intnrfate Infornatlon

Backup subten BIOS ROM J Check flash nonory tgpata) t Plash nenorg block: G1234

Er.ad Hack Itttl

ProScan black till* UerHu h lock Flash pronr*Ki>lng conplata

66* Proprannad |

Nim ■!<!<: träte , liee. Part ttunber ■ KjM/88 11 19 MUPLUt Ma*k parti HX2SIB88 tau Ice 11; 13 Mfr . ID : c2 "«INS block Ii F Ff38888 fron 83BBBB «Ith 166BB but» 811

4. In flash BIOS, the message Please do not remove AC Power Source displays. NOTE: If the AC power is not connected, the following message displays.

Plug in the AC power to continue.

5. Flash is complete when the message Flash programming complete displays.

Perform the following steps to use the WinFlash Utility: 1. Double click the WinFlash executable. The Destination Directory screen displays.

2. Click Start. A warning screen displays.

3. Click OK to begin the update. A progress screen displays.

Acer Aspire 4520 Bios Flash Esc

4. When the process is complete, close all programs and applications and reboot the system.

Was this article helpful?

0 -2
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Responses

Post a comment