BIOS Recovery by Crisis Disk

BIOS Recovery Boot Block:

BIOS Recovery Boot Block is a special block of BIOS. It is used to boot up the system with minimum BIOS initialization. Users can enable this feature to restore the BIOS firmware to a successful one once the previous BIOS flashing process failed.

BIOS Recovery Hotkey:

The system provides a function hotkey: Fn+Esc, for enable BIOS Recovery process when system is powered on during BIOS POST. To use this function, it is strongly recommended to have the AC adapter and Battery present. If this function is enabled, the system will force the BIOS to enter a special BIOS block, called Boot Block.

Steps for BIOS Recovery by Crisis Disk:

Before doing this, one Crisis Diskette should be prepared ready in hand. The Crisis Diskette could be made by executing the Crisis Disk program in another system with Windows XP OS.

Follow the steps below:

  1. Power Off failed system.
  2. Attach a USB floppy drive to the failed system.
  3. Copy jalb028.wph to tool's folder and rename it as BIOS.wph.
  4. Execute wincris.exe to start the Crisis Disk Build.
  5. Select Removable and click Start.




|Rmiovtibl>Di4 0(1Î5 5MB


Duk Fount!

r irai

Mi Option;

r; Cmk ÈI1WDOS Crisis Disk


r Creak EtfUDCS Crcu Di&

£l™ J

C Rjmat the D.-r.' Diskette

r~ Compress The Bin File

6. Select Format Disk and click Start.

" Phoenix Lriftf Disk Uurld(l or internal te»J:


" Phoenix Lriftf Disk Uurld(l or internal te»J:





IFloppy Driver A <1.44Mb)

IT Remwihl!

r B»d

DcJi Options ff CrnttJINItCSCm! r Citil PJLL&M Cat r Forma it* Wife

DcJi Options ff CrnttJINItCSCm! r Citil PJLL&M Cat r Forma it* Wife

Compress The Sin file Copying pjii«h (Sew

7. The following message displays when the Crisis Diskette is created successfully.

Insert Diskette
  1. Click OK to complete the process.
  2. Insert the Crisis Disk in to the USB floppy drive attached to the BIOS flash failed system.
  3. In the power-off state, press and hold Fn+Esc then press the Power button. The system powers on and the Crisis BIOS Recovery process begins.

BIOS Boot Block begins restoring the BIOS code from the Crisis floppy disk to BIOS ROM on the failed systems.

When the Crisis flash process is finished, the system restarts with a workable BIOS. Update to the latest version BIOS for the system using the regular BIOS flashing process.

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


  • chilimanzar sackville-baggins
    How to run crisis bios tool?
    9 years ago
  • marie himmel
    Where to find jalb028.wph?
    9 years ago

Post a comment