Replacing the Thermal Module

WARNING:To prevent damage to the Thermal Module or the CPU, hold the Thermal Module by both ends at the same time.

IMPORTANT:If the replacement Thermal Module does not include the thermal protection pad shown below, reuse the original thermal protection pad with the new Thermal Module.

1. Align and place the Thermal Module in the on the 2. Remove the four screws from the Thermal Module mainboard as shown. numerically, from 1 to 4.

Aspire 4937 Fan
3. Connect fan cable to the mainboard as shown.

1. Replace the RJ-11 Port in the casing as shown. 2. Place the cable bundle in the casing and apply pressure to secure the adhesive in place.

3. Run the cable along the cable channel using all 4. Replace the adhesive tape and insert the cable available cable clips. through the casing as shown.

5. Pull the cable through the casing completely. 6. Turn the computer over and run the cable along the cable channel using all available cable clips.

The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Post a comment