Removing the Touchpad Board Module

"Removing the Battery Pack" on page 53. 'Removing the SD Dummy Card" on page 54. 'Removing the Express Dummy Card" on page 54. 'Removing the Lower Cover" on page 55. 'Removing the DIMM" on page 56. 'Removing the WLAN Board Module" on page 57. 'Removing the Hard Disk Drive Module" on page 58. 'Removing the Optical Drive Module" on page 59. 'Removing the CPU Heatsink Module" on page 62. 'Removing the CPU" on page 63. 'Removing the Keyboard" on page 64. 'Removing the Middle Cover" on page 65. 'Removing the LCD Module" on page 68. 'Separating the Upper Case from the Lower Case" on page 70.

1.

See

2.

See

3.

See

4.

See

5.

See

6.

See

7.

See

8.

See

9.

See

10.

See

11.

See

12.

See

13.

See

14.

See

15. Remove the two screws (A) on the touchpad bracket.

Step

Size (Quantity)

Color

Torque

1~2

M2 x L4 (2)

Black

1.6 kgf-cm

  1. Remove the touchpad bracket from the upper case.
  2. Remove the touchpad bracket from the upper case.

17. Carefully insert the flat screwdriver under the side of the touchpad board and gently pry up the board.

18. Continue prying the board until it releases from the upper case, then remove the board.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment