Removing the LCD Module

1.

See

"Removing the Battery Pack" on page 44.

2.

See

"Removing the Lower Cover" on page 45.

3.

See

"Removing the Lower Cover" on page 45.

4.

See

"Removing the Optical Drive Module" on page 46.

5.

See

'Removing the DIMM" on page 46.

6.

See

'Removing the Hard Disk Drive Module" on page 47.

7.

See

"Removing the SSD Module" on page 48.

8.

See

"Removing the RTC Battery" on page 49.

9.

See

"Removing the Keyboard" on page 51.

10.

See

"Removing the WLAN Board Module" on page 52.

11.

See

"Separating the Upper Case from the Lower Case" on page 53

12.

Release the wireless antenna cables from the latches.

13. Disconnect the LCD cable.

Panel Removing 4810

14. Pell off the LCD cable from the fan.

Acer Aspire 4810t Fan

15. Remove the two screws (E) from the left and right hinge of the LCD module.

Acer Asp 4810tz 4410t

Step

Size (Quantity)

Color

Torque

1~2

M2.5 x L6 (2)

Black

3.0 kgf-cm

16. Carefully remove the LCD module from the base unit.

NOTE: When connecting the cables back to the unit, please note that the cables should be routed well.

Was this article helpful?

+1 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Responses

  • Asphodel
    How to connect lcd cable on aspire 4810tg?
    8 years ago

Post a comment