Replacing the USB Board

1. Insert the USB Board into the casing, ensuring that 2. Run the cable along the casing and insert it into the the USB Port is accessible through the case. FFC connector.

3. Lock the connector and press down on the FFC 4. Ensure the locating pins is correctly seated and cable to secure it on the casing. replace the single securing screw.

WARNING:Care must be taken when replacing the Media Board Cover to prevent damage or stress to the surface.

1. Place the media board in the upper case.

Media Board Acer 4736

2. Secure the three securing screws as shown.

3. Adhere the FFC to the upper case as shown.

Step

Size

Quantity

Screw Type

Media Board

M2.5*3

3

*

  1. Place the TouchPad in the casing. 2. Replace the two securing screws.
  2. Place the TouchPad in the casing. 2. Replace the two securing screws.

3. Replace the FFC and close the locking latch. 4. Run the cable along the Bracket and press down to secure it in place.

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Responses

Post a comment