Removing the LCD with Brackets

1.

See

'Removing

the

Battery Pack" on page 51.

2.

See

'Removing

the

Lower Cover" on page 53.

3.

See

'Removing

the

DIMM" on page 54.

4.

See

'Removing

the

WLAN Board Module" on page 55.

5.

See

'Removing

the

Hard Disk Drive Module" on page 56

6.

See

'Removing

the

Optical Drive Module" on page 57.

7.

See

'Removing

the

CPU Heatsink Module" on page 60.

CO

See

'Removing

the

CPU" on page 61.

9.

See

'Removing

the

Keyboard" on page 62.

10.

See

'Removing

the

Middle Cover" on page 63.

11.

See

'Removing

the

LCD Module" on page 64.

12.

See

'Removing

the

LCD Bezel" on page 82.

13.

See

'Removing

the

Inverter Board" on page 83.

14. Remove the two screws (G) securing the left and right LCD brackets to the LCD back cover.

Step

Size (Quantity)

Color

Torque

1~2

M2.5 x L6 (2)

Silver

2.5 kgf-cm

  1. Detach the LCD with the brackets from the back cover, then turn it over.
  2. Detach the LCD with the brackets from the back cover, then turn it over.

16. Detach the acetic tapes holding the cables to the back panel.

Detach the acetic tapes holding the FPC cable to the edge of the LCD panel.

18. Detach the acetic tape securing the FPC connector.

19. Disconnect the FPC cable from the LCD panel.

See See See See See See See See See

10. See

11. See

12. See

13. See

14. See

Removing the Battery Pack" on page 51. Removing the Lower Cover" on page 53. Removing the DIMM" on page 54. Removing the WLAN Board Module" on page 55. Removing the Hard Disk Drive Module" on page 56. Removing the Optical Drive Module" on page 57. Removing the CPU Heatsink Module" on page 60. Removing the CPU" on page 61. Removing the Keyboard" on page 62. Removing the Middle Cover" on page 63. Removing the LCD Module" on page 64. Removing the LCD Bezel" on page 82. Removing the Inverter Board" on page 83. Removing the LCD with Brackets" on page 84.

15. Remove the four screws (H) securing the left and right LCD brackets to remove the brackets.

Step

Size (Quantity)

Color

Torque

1~4

M2 x L3 (4)

Silver

1.6 kgf-cm

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment