Removing the DIMM

  1. See "Removing the Battery Pack" on page 51.
  2. See "Removing the Lower Cover" on page 53.
  3. Push out the latches on both sides of the DIMM socket to release the DIMM.
Acer Aspire 4710 Hard Disk

4. Remove the DIMM module.

  1. See "Removing the Battery Pack" on page 51.
  2. See "Removing the Lower Cover" on page 53.
  3. Detach the wireless board barcode label from the WLAN board.

4. Disconnect the two antenna cables from the WLAN board, then move the antennas away from the board.

5. Remove the two screws (A) on the WLAN board to release the WLAN board.

Step

Size (Quantity)

Color

Torque

1~2

M2 x L4 (2)

Black

1.6 kgf-cm

Detach the WLAN board from the WLAN socket.

NOTE: When attaching the antennas back to the WLAN board, make sure the cable are routed properly.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment