WARNING:To prevent damage to the Thermal Module or the CPU, hold the Thermal Module by both ends at the same time.
IMPORTANT: Ensure all heat pads / thermal compound are in place before replacing the Thermal Module. The following thermal pads are approved for use:
The following thermal compounds are approved for use:
1. Replace the RJ-11 Port in the casing as shown. 2. Place the cable bundle in the casing and apply pressure to secure the adhesive in place.
3. Run the cable along the cable channel using all 4. Replace the adhesive tape and insert the cable available cable clips. through the casing as shown.
5. Pull the cable through the casing completely. 6. Turn the computer over and run the cable along the cable channel using all available cable clips.
7. Insert the cable through the casing to the top side as shown.
Was this article helpful?
Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.