Current Password Acer Aspire As3810t

The Main screen displays a summary of your computer hardware information, and also includes basic setup parameters. It allows the user to specify standard IBM PC AT system parameters.

lnsydeH20 Setup Utility

Information 'RÎT Security Boot Exit

System Time: System Date:

System Memory : Total Memory Video Memory :

Quiet Boot: Network Boot F12 Boot Menu D2D Recovery SATA Mode Help Exit

XXXX KB XXXXMB [64MB]

Item specific Help

This is the help for the hour field. Vaild range is from 0 to 23. REDUCE/ INCREASE : F5/F6.

[Enabled] [Enabled] [Disabled] [Enabled] [AHCI Mode] Select Item ^^^MDhange Values Select MeniM^nHaelect^ Sub-Menu s enu

Setup defaults Save and Exit

NOTE: The screen above is for your reference only. Actual values may differ.

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter

Description

Format/Option

System Time

Sets the system time. The hours are displayed with 24-hour format.

Format: HH:MM:SS (hour:minute:second) System Time

System Date

Sets the system date.

Format MM/DD/YYYY (month/day/year) System Date

System Memory

This field reports the memory size of the system.

Total Memory

This field reports the memory size of total memory in the system.

Video Memory

Shows the Video memory size.

Quiet Boot

Determines if Customer Logo will be displayed or not; shows Summary Screen is disabled or enabled. Enabled: Customer Logo is displayed, and Summary Screen is disabled. Disabled: Customer Logo is not displayed, and Summary Screen is enabled.

Option: Enabled or Disabled

Network Boot

Enables, disables the system boot from LAN (remote server).

Option: Enabled or Disabled

F12 Boot Menu

Enables, disables Boot Menu during POST.

Option: Disabled or Enabled

D2D Recovery

Enables, disables D2D Recovery function. The function allows the user to create a hidden partition on hard disc drive to store operation system and restore the system to factory defaults.

Option: Enabled or Disabled

SATA Mode

Choose which mode of HDD mode. Please be careful for changing this setting because it might cause system fail to boot.

Option: AHCI Mode or IDE Mode

NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is because the user is not allowed to control the settings in these cases.

Security

The Security screen contains parameters that help safeguard and protect your computer from unauthorized use.

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter

Description

Option

Supervisor Password is

Shows the setting of the Supervisor password

Clear or Set

User Password is

Shows the setting of the user password.

Clear or Set

HDD Password is

Shows the setting of HDD password

Clear or Set

Set Supervisor Password

Press Enter to set the supervisor password. When set, this password protects the BIOS Setup Utility from unauthorized access. The user can not enter the Setup menu and change he value of parameters.

Set User Password

Press Enter to set the user password.

When user password is set, this password protects the BIOS Setup Utility from unauthorized access.

The user can enter Setup menu only and does not have right to change the value of parameters.

Set Hdd Password

Press Enter to ser the Hdd password. When Hdd password is set, this password protects the Hdd . Other user can't steal information.

Parameter

Description

Option

Password on Boot

Defines whether a password is required or not while the events defined in this group happened. The following sub-options are all requires the Supervisor password for changes and should be grayed out if the user password was used to enter setup.

Disabled or Enabled

NOTE: When you are prompted to enter a password, you have three tries before the system halts. Don't forget your password. If you forget your password, you may have to return your notebook computer to your dealer to reset it.

Setting a Password

Follow these steps as you set the user or the supervisor password:

1. Use the w andy keys to highlight the Set Supervisor Password parameter and press the e key. The Set Supervisor Password box appears:

Set Supervisor Password Enter New Password [ Confirm New Password [

2. Type a password in the "Enter New Password" field. The password length can not exceeds 8 alphanumeric characters (A-Z, a-z, 0-9, not case sensitive). Retype the password in the "Confirm New Password" field.

IMPORTANT:Be very careful when typing your password because the characters do not appear on the screen.

After setting the password, the computer sets the User Password parameter to "Set".

  1. If desired, you can opt to enable the Password on boot parameter.
  2. When you are done, press u to save the changes and exit the BIOS Setup Utility.

Removing a Password

Follow these steps:

1. Use the w and y keys to highlight the Set Supervisor Password parameter and press the e key. The Set Password box appears:

Set Supervisor Password

Enter current p as sword [

]

Enter New Password [

]

Confirm New Password [

]

  1. Type the current password in the Enter Current Password field and press e.
  2. Press e twice without typing anything in the Enter New Password and Confirm New Password fields. The computer then sets the Supervisor Password parameter to "Clear".
  3. When you have changed the settings, press u to save the changes and exit the BIOS Setup Utility.

Changing a Password

1. Use the w and y keys to highlight the Set Supervisor Password parameter and press the e key. The Set Password box appears:

Set Supervisor Password

Enter current p as s wo rd [

]

Enter New Password [

]

Confirm Hew Password [

]

  1. Type the current password in the Enter Current Password field and press e.
  2. Type a password in the Enter New Password field. Retype the password in the Confirm New Password field.
  3. Press e. After setting the password, the computer sets the User Password parameter to "Set".
  4. If desired, you can enable the Password on boot parameter.
  5. When you are done, press u to save the changes and exit the BIOS Setup Utility. If the verification is OK, the screen will display as following.

The password setting is complete after the user presses u.

If the current password entered does not match the actual current password, the screen will show you the Setup Warning.

If the new password and confirm new password strings do not match, the screen will display the following message.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Responses

  • camelia
    How to acer 3810tzg hard disk change?
    9 years ago
  • Jill Carillo
    How to format acer aspire 3810?
    9 years ago
  • giuditta
    How to reformat a computer netbook acer aspire 3810tz?
    9 years ago
  • hiewan
    How to recover hidden partion acer 3810t?
    9 years ago

Post a comment