Removing the LCD Module

  1. Open the LCD module as shown (See the left and the middle picture).
  2. Detach the middle cover from the main unit carefully.
Aspire 3690 Keyboard Remove
  1. Remove the screw fastening the keyboard.
  2. Then turn over the keyboard as shown.
  3. Disconnect the keyboard cable from the main board.
  1. Turn over the notebook, remove two screws fastening the LCD module on the bottom.
  2. Then turn the notebook to the front side. Take out the antenna then disconnect the LCD cable (See the middle and the right images).
  1. Remove four screws fastening the LCD module (M2.5*10(NL) for yellow circles; M2.5*15(NL) for red circles).
  2. Then detach the entire LCD module from the main unit carefully.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook

Post a comment