Removing the Main Board

1.

See

"Removing

the Battery" on page 50.

2.

See

"Removing

the Middle Cover" on page 53.

3.

See

"Removing

the Keyboard" on page 53.

4.

See

"Removing

the Power Board" on page 58.

5.

See

"Removing

the Upper Case Assembly" on page 58.

6.

See

"Removing

the Speaker Set" on page 60.

7.

See

"Removing

the SW DJ Board Assembly" on page 60

CO

See

"Removing

the Audio Board" on page 61.

9.

See

"Removing

the VGA Thermal Module" on page 61.

  1. See "Removing the Modem Board" on page 62.
  2. Remove the two nut screws securing the main board.
  3. Press the PCMCIA card button.
Acer Aspire 7535 7535g 7235 Assembly
  1. Remove the dummy card.
  2. Remove the two screws securing the main board to the lower case.
  3. Then detach the main board from the lower case carefully.

IMPORTANT:When assembling/disassembling the main board, whenever there is a mylar on the main board (see the highlighted with red below; the mylar is sami-transparent, film-like stuff ), it should be transferred "if necessary" to the replacement main board. Because the main board mylar should be stuck to the main board to prevent the antenna cable and the main board components short circuit. The short could cause the main board or the antenna cable burned.

Acer Aspire 5740 Short Circuit Fix
+3 0

Post a comment