NOTE The system information is subject to different models

Parameter

Description

Product Name

This field displays the prodcut name of the system.

Manufacturer Name

This field displays the manufacturer name of the system

BIOS Version

This field displays the BIOS version of the system.

VGA Version

This field shows the VGA firmware version of the system.

HDD Model Name

This field shows the model name of HDD installed on primary IDE master.

HDD Serial Number

This field displays the serial number of HDD installed on primary IDE master.

ATAPI Mode Name

This field displays the mofel name of devices installed on secondary IDE master. The hard disk drive or optical drive model name is automatically detected by the system.

Serial Number

This field displays the serial number of this unit.

Asset Tag

This field displays the asset tag of this unit.

UUID

This will be visible only when an internal LAN device is presenting. UUID=32bytes

CPU

This field shows the brand name of the system CPU.

CPU speed

Parameter

Description

L2 Cache

This field displays CPU L2 cache size. It varies in CPU type.

System Memory

This field reports the memory size of system base memory. The size is fixed to 640 KB.

Extended Memory

This field reports the memory size of the extended memory in the system. Extended memory size = Total memory size - 2MB

Discrete = 64 or 128MB (depends on actual VRAM size) TurboCache = 32MB (actual TurboCache VRAM size) Intel(R) 915 DVMT: you can select the following options:

  1. 64MB (8MB pre-allocated + 56MB DVMT)
  2. 128MB (8MB pre-allocated + 128MB DVMT)-Default value
  3. Max DVMT (160MB on 256MB system memory, 224MB on 512 and above system memory).

The Main screen displays a summary of your computer hardware information, and also includes basic setup parameters. It allows the user to specify standard IBM PC AT system parameters.

The Main screen displays a summary of your computer hardware information, and also includes basic setup parameters. It allows the user to specify standard IBM PC AT system parameters.

Insyde Software SCU

Advanced

Security

Boot

Exit

Date and Time v Network Boot

V LCD Auto DIM

V Quiet Boot

F12 Boot Menu

v D2D Recovery

Press <Tab> key to select a control. <OK> button or <Enter> key accept entries. <Cancel> button or <Esc> key reject entries. Use cursor, spacebar, and numeric keys to change values. <Alt> key activates accelerators.

NOTE: The screen above is for your reference only. Actual values may differ.

Was this article helpful?

0 0

Post a comment