Removing the LCD Module

  1. Remove the three screws holding the keyboard cover.
  2. Open the LCD module as the picture shown then detach the keyboard cover from the main unit.
  1. Remove the two screws that secure the keyboard as shown.
  2. Turn over the keyboard as shown and disconnect the keyboard cable then remove the keyboard.
  3. Pull out the antenna set with a tweezers then take out the antenna set from the main unit.
  1. Disconnect the LCD coaxial cable.
  2. Remove the four screws holding the right and the left hinge. Two on each side.
  3. Then detach the LCD module from the main unit.

Disassembling the Main Unit

Was this article helpful?

0 0

Post a comment