Before You Begin

Before proceeding with the disassembly procedure, make sure that you do the following:

  1. Turn off the power to the system and all peripherals.
  2. Unplug the AC adapter and all power and signal cables from the system

NOTE: Aspire 9100 series product uses mylar or tape to fasten the FFC/FPC/connectors/cable, you may need to tear the tape or mylar before you disconnect different FFC/FPC/connectors.

Disassembly Procedure Flowchart

The flowchart on the succeeding page gives you a graphic representation on the entire disassembly sequence and instructs you on the components that need to be removed during servicing. For example, if you want to remove the main board, you must first remove the keyboard, then disassemble the inside assembly frame in that order.

Screw List

Item

Description

A

SCREW F040 9 5.0X5.0 9.5X(IO) R00

B

SCREW M2.0X0.4P+3FP ZK(NL)

C

SCREW M2.5 K 5/2 X0.85 4 ZK(NL)

D

SCREW M2.5X0.45+10K NIL

E

SCREW M2.5X0.45+8K ZBL

F

SCREW M2.5X0.45P+3F NI

G

SCREW M3.0X0.8P+3K NL

Removing the Battery Pack

  1. Unlock the battery lock.
  2. Slide the battery latch as shown.
  3. Then remove the battery pack.

Removing the HDD Module/the Memory and the Wireless LAN Card/ the Thermal Module and the CPU/ODD Module and LCD Module

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment