Replacing the LCD Panel

  1. Insert the MIC cable along the mylar tabs as shown.
  2. Replace the tabs over the cable to secure in place.
  3. Replace the tabs over the cable to secure in place.
3. Replace the padding over the mylar cover. 4. Replace the mylar strip on both Antennas.
5. Replace both Antennas, take note of screw socket facing upwards.
6. Replace the eleven (11) adhesive strips to secure the Antenna cables.
7. Secure the top of the brackets in place and pivot the brackets towards the LCD Panel as shown.
8. Replace the four securing screws (two on each side) from the LCD Panel brackets.
  1. Connect the LCD cable to the panel. 10. Replace the cable and press down attach the adhesive strips.
  2. Connect the LCD cable to the panel. 10. Replace the cable and press down attach the adhesive strips.
Lcd Panel Adhesive
11. Insert the top of LCD Panel first and tilt down in place.

IMPORTANT:Ensure all cabling is tucked correctly in the back cover. 12. Replace the two (2) securing screws on the LCD Module.

IMPORTANT:The correct screw sockets are indicated by the mark on the hinge.

13. Hold the connector with one hand and insert the 14. Lower the camera module as shown Camera Module as shown.

18. Insert the right side and lower Module in place. 19. Replace the single securing screw.
20. Replace the adhesive strip to secure the cabling in place.

NOTE: Ensure all cabling is tucked in under the adhesive strip to prevent damage.

Was this article helpful?

0 0
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Post a comment