Removing the Optical Drive Module

  1. See "Removing the Battery Pack" on page 44.
  2. Loosen the screw to remove the ODD cap.
  3. Remove the single securing screw.

Step

Size

Quantity

Screw Type

ODD Module

M2.5*8

1

5. Remove the two screws securing the ODD bracket and remove the ODD bracket from the optical disk drive module.

Step

Size

Quantity

Screw Type

ODD Bracket

M2*3

2

*

IMPORTANT:Do not remove the ODD bezel by pulling on it entirely or damage will occur. 6. Grasp the edge of the bezel and firmly pry the top edge down and outward to remove.

  1. Remove the Memory Cover. See "Removing the Lower Covers" on page 47. IMPORTANT: It is advisable to use a plastic pry during this procedure.
  2. Use a pry to release the latches on both sides of the DIMM socket.

3. Remove the DIMM module.

4. Repeat steps for the second DIMM module.

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Responses

  • Kayleigh Robertson
    How to remove optical drive from acer aspire 2930?
    9 years ago

Post a comment