Removing the Hard Disk Drive Module

  1. See "Removing the Battery Pack" on page 44.
  2. Remove the HDD2 cover. See "Removing the Lower Covers" on page 47.
  3. Remove the three screws securing the HDD module.

Step

Size

Quantity

Screw Type

HDD Module

M3*5

3

*

  1. Pull the HDD out of the bay and clear out of the chassis.
  2. Pull the HDD out of the bay and clear out of the chassis.
NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it.
  1. Remove the four screws securing the hard disk to the carrier.
  2. Remove the four screws securing the hard disk to the carrier.

Step

Size

Quantity

Screw Type

HDD Carrier

M3*3

4

NOTE: Replace the screws according to the numbering sequence as shown in the previous image. 6. Remove the HDD from the carrier.

NOTE: Replace the screws according to the numbering sequence as shown in the previous image. 6. Remove the HDD from the carrier.

Remove Hard Disk From Aspire 5920

Was this article helpful?

0 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Responses

  • casey
    How to remove hard disk aspire 2930?
    9 years ago

Post a comment