Set Supervisor User Password

If password on boot is required, the password must be set otherwise it cannot be enabled. The formats of the password are as follows: Length No more than 8 characters Characters 0-9,A-Z (not case sensitive)

Parameter

Description

Option

Set User Password

Press Enter to set the user password. When set, this password protects the BIOS Setup Utility from unauthorized access.

Length -- No more than 8 characters

Characters -- 0-9, A-Z (not case sensitive)

Set Supervisor Password

Press Enter to set the administrator password. When set, this password protects the BIOS Setup Utility from unauthorized access.

Parameter

Description

Option

Lock Hard Disk Drive

This feature is available to user when Supervisor password is set. Password can be written on HDD only when Supervisor password or user password is set and password onHDD is set to enabled. Supervisor Password is written to HDD when only Supervisor password is being set. User password is written to HDD when both passwords are set. When both Supervisor and user passwords are present, both passwords can unlock the HDD.

Disabled/Enabled

Password on Boot

Defines whether a password is required or not while the events defined in this group happened. The following suboptions are all requires the Supervisor password for changes and should be grayed out if the user password was used to enter setup.

Allows the user to specify whether or not a password is required to boot.

Check Uncheck

Was this article helpful?

0 0
Computer Hard Drive Data Recovery

Computer Hard Drive Data Recovery

Learn How To Recover Your Hard Drive Data After A Computer Failure.

Get My Free Ebook


Post a comment