Information

The Information screen displays a summary of your computer hardware information.

InsydelH20 Setup Utility

Information Main

Security Boot Exit

CPU Type:

Genuine Intel (R) CPU U2300

CPU Speed:

1.20GHz

IDE 0 Model Name:

TOSHIBA MK2555GSX

IDE 0 Serial Number:

89IBP6AKT

ATAPI Model Name:

None

System BIOS Version:

v0.2103

VGA BIOS Version:

Intel V1800

Serial Number:

ZE80SK01C191A0792500

Asset Tag Number:

20202

Product Name:

Manufacturer Name :

Acer

UUID:

A570A794A5554A0BABFDC44254EFC55F

Help Exit

Select Item Select Menu

Change Values Select ► Sub-Menu

Setup Default Save and Exit

NOTE: The system information is subject to different models.

Parameter

Description

CPU Type

This field shows the CPU type and speed of the system.

CPU Speed

This field shows the speed of the CPU.

HDD Model Name

This field shows the model name of HDD installed on primary IDE master.

HDD Serial Number

This field displays the serial number of HDD installed on primary IDE master.

ATAPI Model Name

This field displays the model name of the installed ODD drive.

System BIOS Version

Displays system BIOS version.

VGA BIOS Version

This field displays the VGA firmware version of the system.

Serial Number

This field displays the serial number of this unit.

Asset Tag Number

This field displays the asset tag number of the system.

Product Name

This field shows product name of the system.

Manufacturer Name

This field displays the manufacturer of this system.

UUID Number

Universally Unique Identifier (UUID) is an identifier standard used in software construction, standardized by the Open Software Foundation (OSF) as part of the Distributed Computing Environment (DCE).

The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery.

InsydelH20 Setup Utility

Rev. 3.5

Information

Main Security Boot Exit

System Time

[13:52:10]

System Date

[10/06/2009]

Total Memory

2048 MB

Video Memory:

[64MB]

Quiet Boot

[Enabled]

Network Boot

[Enabled]

F12 Boot Menu

[Disabled]

D2D Recovery

[Enabled]

SATA Mode

[AHCI Mode]

Item Specific Help

This is the help for the hour field. Valid range is from 0 to 23. REDUCE / INCREASE : F5/F6

Select Item Select Menu

Values Sub-Menu

Setup Default Save and Exit

NOTE: The screen above is for your reference only. Actual values may differ.

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter

Description

Format/Option

System Time

Sets the system time. The hours are displayed with 24hour format.

Format: HH:MM:SS (hour:minute:second)

System Date

Sets the system date.

Format MM/DD/YYYY (month/day/year)

Total Memory

This field reports the memory size of the system. Memory size is fixed to 2048 MB.

N/A

Video Memory

Shows the video memory size. VGA Memory size=32 MB

N/A

Quick Boot

Allows startup to skip certain tests while booting, decreasing the time needed to boot the system.

Option: Enabled or Disabled

Network Boot

Enables, disables the system boot from LAN (remote server).

Option: Enabled or Disabled

F12 Boot Menu

Enables, disables Boot Menu during POST.

Option: Enabled or Enabled

D2D Recovery

Enables, disables D2D Recovery function. The function allows the user to create a hidden partition on hard disc drive to store operation system and restore the system to factory defaults.

Option: Enabled or Disabled

SATA Mode

Control the mode in which the SATA controller should operate.

Option: AHCI or IDE

The Security screen contains parameters that help safeguard and protect your computer from unauthorized use.

Information

Power on password

InsydelH20 Setup Utility

InsydelH20 Setup Utility

Power Password

Supervisor Password Is : Clear User Password Is : Clear

HDD Password Is : Clear

Set Supervisor Password Set User Password Set Hdd Password

[Disabled]

Install or Change the password and the length of password must be greater than one word.

Select Item Select Menu

F5/F6 Enter

Change Values Select ► Sub-Menu

Setup Default Save and Exit

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter

Description

Option

Supervisor Password Is

Shows the setting of the Supervisor password

Clear or Set

User Password Is

Shows the setting of the user password.

Clear or Set

Set Supervisor Password

Press Enter to set the supervisor password. When set, this password protects the BIOS Setup Utility from unauthorized access. The user can not either enter the Setup menu nor change the value of parameters.

Set User Password

Press Enter to set the user password. When user password is set, this password protects the BIOS Setup Utility from unauthorized access. The user can enter Setup menu only and does not have right to change the value of parameters.

Set Hdd Password

Enter HDD password.

Power on password

Defines whether a password is required or not while the events defined in this group happened. The following sub-options are all requires the Supervisor password for changes and should be grayed out if the user password was used to enter setup.

Enabled or

Disabled

NOTE: When you are prompted to enter a password, you have three tries before the system halts. Don't forget your password. If you forget your password, you may have to return your notebook computer to your dealer to reset it.

0 0

Responses

Post a comment