1. Place the RTC battery into the holding clips on the main board.
1. Connect the thermal module connector to the main board.
2. Place the Thermal Module onto the main board. Then first tighten the three captive screws marked 1, 2, 3 on the thermal module in order: 1-2-3. First tighten Screw 1, then screw 2, then screw 3.
IMPORTANT: Incorrect order of screw replacement could harm the CPU. 3. The tighten the other two captive screws
Was this article helpful?
Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.