Information

The Information screen displays a summary of your computer hardware information.

Information

Main

InsydeH20 Setup Utility

Security Boot Exit

CPU Type CPU Speed

HDD Model Name: HDD Serial Number: ATAPI Model name:

System BIOS Version: VGA BIOS Version:

Serial Number: Asset Tag Number: Product Name: Manufacturer Name: UUID:

Intel(R) Core(TM)2 Solo CPU 1.40GHz

Hitachi HTS545032B9A300

090515PB5C06QDGYRDWG

None v0.1108h Intel V1800

ZH70SK01C1924125A42500 2020202020202020202020202020202020

Acer

497CDC77E0224E159D78ACE77B820EBC

a Change Values Select ► SubMenu

Setup Default Save and Exit

NOTE: The system information is subject to variance across different models.

Parameter

Description

CPU Type

This field shows the CPU type and speed of the system.

CPU Speed

This field shows the speed of the CPU.

HDD Model Name

This field shows the model name of HDD installed on primary IDE master.

HDD Serial Number

This field displays the serial number of HDD installed on primary IDE master.

ATAPI Model Name

This field displays the model name of the installed ODD drive.

System BIOS Version

Displays system BIOS version.

VGA BIOS Version

This field displays the VGA firmware version of the system.

Serial Number

This field displays the serial number of this unit.

Asset Tag Number

This field displays the asset tag number of the system.

Product Name

This field shows product name of the system.

Manufacturer Name

This field displays the manufacturer of this system.

UUID Number

Universally Unique Identifier (UUID) is an identifier standard used in software construction, standardized by the Open Software Foundation (OSF) as part of the Distributed Computing Environment (DCE).

The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery.

Information! Main ^Securit

InsydeH20 Setup Utility

Information! Main ^Securit

Security Boot Exit

10:59]

System Date:

[06/09/2009]

System Memory:

640 K

Total Memory:

4096 MB

Video Memory:

[64MB]

Quiet Boot

[Enabled]

Network Boot

[Enabled]

F12 Boot Menu

[Disabled]

D2D Recovery

[Enabled]

SATA Mode

[AHCI Mode]

Item Specific Help

This is the help for the hour field. Valid range is from 0 to 23. INCREASE/REDUCE: F5/F6

Help Exit a

Select Select

Item Menu

Change Values Select ► SubMenu

Setup Default Save and Exit

F9 F10

NOTE: The screen above is for your reference only. Actual values may differ.

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter

Description

Format/Option

System Time

Sets the system time. The hours are displayed with 24hour format.

Format: HH:MM:SS (hour:minute:second)

System Date

Sets the system date.

Format MM/DD/YYYY (month/day/year)

System Memory

This field reports system memory size.

N/A

Total Memory

This field reports the memory size of the system. Memory size is fixed to 4096MB.

N/A

Video Memory

Shows the video memory size. VGA Memory size=32 MB

N/A

Quiet Boot

This will hide POST messages while booting.

Option: Enabled or Disabled

Network Boot

Enables, disables the system boot from LAN (remote server).

Option: Enabled or Disabled

F12 Boot Menu

Enables, disables Boot Menu during POST.

Option: Enabled or Enabled

D2D Recovery

Enables, disables D2D Recovery function. The function allows the user to create a hidden partition on hard disc drive to store operation system and restore the system to factory defaults.

Option: Enabled or Disabled

SATA Mode

Control the mode in which the SATA controller should operate.

Option: AHCI or IDE

The Security screen contains parameters that help safeguard and protect your computer from unauthorized use.

Bios Acer Travelmate 290

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter

Description

Option

Supervisor Password Is

Shows the setting of the Supervisor password

Clear or Set

User Password Is

Shows the setting of the user password.

Clear or Set

Set Supervisor Password

Press Enter to set the supervisor password. When set, this password protects the BIOS Setup Utility from unauthorized access. The user can not either enter the Setup menu nor change the value of parameters.

Set User Password

Press Enter to set the user password. When user password is set, this password protects the BIOS Setup Utility from unauthorized access. The user can enter Setup menu only and does not have right to change the value of parameters.

Set HDD Password

Enter HDD password.

Power on password

Defines whether a password is required or not while the events defined in this group happened. The following sub-options are all requires the Supervisor password for changes and should be grayed out if the user password was used to enter setup.

Enabled or

Disabled

NOTE: When you are prompted to enter a password, you have three tries before the system halts. Don't forget the password. If you forget the password, you may have to reset the computer.

The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Post a comment